CTC Union IMC-1000M-PH12 Quick Installation Manual

Installation
can be mounted on the wall or installed in DIN rail
IMC-1000M-PH(E)12
depending on your installation needs. When installing the wall-
mounting bracket (optional accessory) and DIN rail bracket, be sure to
correctly align the orientation pin.
Figure 10. DIN Rail
IMC-1000M-PH(E)12 with DIN Rail bracket have a steel spring in the upper
rail of the bracket. This spring is compressed for mounting and un-mounting
by applying downward force.
Figure 12. Mounting
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St., Neihu District, Taipei 114
Taiwan
© 2014 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IMC-1000M-PH(E)12 & IMC-1000MS-PH(E)12 are Gigabit Ethernet PoE
(Power over Ethernet) managed media converters that support conversion
between electrical 10/100/1000Base-TX and optical 100/1000Base-X Ethernet.
Housed in rugged DIN rail or wall mountable enclosures, these converters are
designed for harsh environments, such as industrial networking and intelligent
transportation systems (ITS) and are also suitable for many military and utility
market applications where environmental conditions exceed commercial
product specifications.
Package List
 IMC-1000M-PH(E)12 device with terminal block
 Quick installation guide
 Din rail with screws
Features
 12/24/48VDC (9.6~57VDC) redundant dual input power and built-in very
high efficient power booster
 Constant and regulated PoE output voltage at 55VDC
 IP30 rugged metal housing
 Dual rate (100/1000M) optical support
 Wide temperature range -20°C~75°C (IMC-1000M-PHE12 & IMC-1000MS-
PHE12)
 Industrial grade EMS, EMI, EN50121-4, EN61000-6-2, EN61000-6-4
Specifications
Optical Interface
 Standards: IEEE 802.3u, 802.3z
 Speed: 100/1000M
 SC connector－IMC-1000-PH(E)12
SFP slot－IMC-1000S-PH(E)12
 Multimode (500m) 50/125um, 62.5/125um
 Single mode (2km, 20km or 40km) 9/125um
 Wavelength: 1310nm (S/M or M/M)
Ethernet Interface
 Standards: IEEE802.3, 802.3u, 802.3ab
 Connector: RJ-45 (shielded)
 Auto MDI/MDI-X
 Speed: 10/100/1000Base-T (Auto)
 Duplex: Full/Half (Auto)
 Jumbo Frame: 9K bytes
 Link Fault Pass Through (LFP)
Power over Ethernet
 1 PoE Enabled port
 Supports IEEE802.3af 15.4W PoE & IEEE802.3at 30W PoE+
 Positive (VCC+) pins 1, 2; Negative (VCC-) pins 3, 6
 Data: pins 1, 2, 3, 4, 5, 6, 7, 8
www.ctcu.com
Figure 11. Wall Mount
Figure 13. Un-mounting
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
- 7 -
- 1 -
Quick Installation Guide
IMC-1000M-PH12, IMC-1000MS-PH12
IMC-1000M-PHE12, IMC-1000MS-PHE12
Industrial Grade Gigabit Ethernet PoE+ Managed Media Converters
sales@ctcu.com
Specifications (cont.)
Power
 Absolute Range: 9.6~57VDC
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Support Removable Terminal Block
 Consumption:
Items
Total Power
Consumption
Input Voltage
12VDC 34.4W
IMC-1000M-
24VDC 34.9W
PH(E)12
48VDC 35.4W
12VDC 34.2W
IMC-1000MS-
24VDC 34.7W
PH(E)12
48VDC 35.4W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 106 mm (D) x 62.5 mm (W) x 135 mm (H)
 Mounting: DIN-Rail, Wall Mount (Optional)
 Weight: 655g－IMC-1000M-PH(E)12; 650g－IMC-1000MS-PH(E)12
Environmental
 Operating Temperature: -10°C~60°C － IMC-1000M-PH12
-20°C~75°C － IMC-1000M-PHE12
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart B Class A, CE
EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
 Safety: UL60950-1 (Pending)
 Shock: EN60068-2-27
 Freefall: EN60068-2-32
 Vibration: EN60068-2-6
 MTBF (MIL-HDBK-217): 780,057 hours－IMC-1000M-PH(E)12
864,121 hours－IMC-1000MS-PH(E)12
Device Power PoE Boost
Consumption Budget Efficiency
3.9W 30W 98.4%
4.5W 30W 98.7%
4.7W 30W 97.7%
3.9W 30W 99.0%
4.4W 30W 99.0%
4.7W 30W 97.7%
- 2 -
V1.1