Sensio SE30696C0 Installation Instructions

furniture lighting solutions
IMPORTANT: Please read these 1nstruct1ons before cornn1encin g 1nstallat1on and retain for future reference.
Components
1 x LED mirror (screws and spacers attached)

Important Safety Information

Please read these instructions carefully before attempting to install this
product. It is advisable to keep these instructions in a safe place for
future reference.
We recommend that you consult a qualified electrician. All
electrical installation must be carried out in accordance with
current IEE wiring regulations (BS7671).
These products must not be modified, if any modification are made, it
may invalidate the warranty and may render the product unsafe.
This product should be used indoors only.
Safety Instructions
l. Before commencing installation or maintenance, isolate the main electrical supply for the appropriate circuit at the fuse board.
2. This product is only suitable for connecting to a 240V SOHz supply.
3. The mirror should be mounted onto a secure surface.
4. When installing please take care to avoid water pipes, joints and electrical cables.
Waste Electrical & Electronic Equipment (WEEE I
The on the product, or on the document aa:ompanying the product, the crossed out wheelie
symbol
bin indicates that this product may not be treated as household waste.
symbol,
Instead It shall be handed over to the applicable collection point for the recycling of electrical and
electronic waste.
Sensio House, Unit 7, Speedwell Road, Whitwood, Castleford, West Yorkshire,
www.sensio.co.uk
Technical drawings for illustration purposes only, Sensio had the right to change any information without
prior notice. Make sure you check all hole cut outs before work commences.
1 x KAI
700mm
SLIMLINE
LED MIRROR
IP44
CODE: SE30696CO
1 x Instructions
• If in doubt installation must be carried out by a qualified electrician.
• Install on smooth flat surface(s) only.
• Do not exceed or stretch the cable length of each LED wire.
• There are 60 x 0.07W high power LED's in this mirror.
• Please make sure the LED's are working correctly before
• This mirror is rotation ready, so can be hung landscape or portrait.
WFlO
SPY

Tools required

1 x Pencil
commencing installation.
-
1 x Screw driver