Figure 2-6 Establishing A Common Ground Connection - Raytheon Standard 30 MF Operator's And Service Manual

Figure 2-6
20. Make the common ground connection as shown in the figure above.
21. Mount the cable bracket between two toothed washers.
22. Position the Standard 30 MF in the selected installation position above the prepared
attachment points.
23. Loosely attach the Standard 30 MF.
24. Align the Standard 30 MF parallel to the roll axis or, respectively, the pitch axis of the
vessel.
25. Tighten the attachment screws and/or attachment nuts on the four attachment points
to a tightening torque of 7.5 Nm.
26. Find out the reference heading of the pier at which the vessel is moored from a
suitable source (e.g., sea chart).
‐ The pier heading serves as a reference value for calculating the heading correction
value for the Standard 30 MF.
27. Read the heading displayed on the Operator Unit.
28. Calculate and enter the heading correction value as described in chapters 2.3.8.1
and 2.3.8.2.
29. Proceed in the same way for roll and pitch alignment.
Edition: 8
Establishing a Common Ground Connection
Common ground connections must be free of corrosion and well
fastened.
2-15
Standard 30 MF
110-700
Operator and Service Manual
4361.DOC010302 AUG18.DOCX