Active Medical Sovereign Instructions For Use Manual page 35

Fig. E
Fig. F
Fig. G
Fig. H
Attachment to the vehicle floor
Rails (Fig. E)
Insert fitting into rail at an angle and then pull in
sideways. Detach the fittings by pulling on the snap
ring.
Mono System (Fig. F)
Place mono-fitting flat on the base plate and pull
over the base plate. Detach the mono-fittings by
pulling down from the base plate.
Attachment to wheelchair
Attachment to the wheelchair may be by
securement points (Fig. G) or tie-down system
(Fig. H ) to the labelled points.
Under no circumstances attach the strap to the
footrests or other detachable parts.
Tensioning and loosening the straps
• Tension using handle (Fig. I)
• Loosening using lever or alternatively by
releasing the belt tongue from the belt buckle
(Fig. J).
ORDER NOW >
Sovereign Wheelchair
1800 267 267 > activemedicalsupplies.com.au
35