Seat - Active Medical Sovereign Instructions For Use Manual

6.5

Seat

Fig. 17
Fig. 18
Fig. 19
6.5.1 Seat Depth
The seat depth can be adjusted in five steps.
This allows the depth to be changed by up to ten
centimetres.
Step 1: Remove the side part bracket and the
backrest bracket by loosening the fastening screws
(see Fig. 17).
Caution. Danger of tipping! If you adjust the
!
driving wheel forwards or the backrest
backwards, the danger of tipping is
increased significantly. Anti-tilt rollers or an
extended wheelbase are then necessary.
Check the settings first with a helper. Only
use settings that you feel safe with.
Step 2: Remove the Allen bolts at the back on the
seat cover (see Fig. 18). Pull the adapter out to the
required position and then retighten the bolt
Step 3: pull back the rear part of the seat cover and
connect this again with the front seat cover using
the Velcro tape (see Fig. 19).
Step 4: Reattach the backrest to the wheelchair
frame. Position it as close as possible to the seat.
Step 5: Mount the bracket so that the side parts
click into place correctly.
ORDER NOW >
Sovereign Wheelchair
1800 267 267 > activemedicalsupplies.com.au
17