Accessories; Tilt Protection; Safety Belt - Active Medical Sovereign Instructions For Use Manual

8 Accessories

8. 1 Tilt Protection / Anti-tilt Rollers
Fig. 40
Fig. 41
8.2

Safety Belt

Fig. 42
Always use the anti-tilt mechanism in pairs.
To mount tilt protection, proceed as follows.
• Remove the rubber profiles of the tip assist
• Push the round profile for the tilt protection
onto the lower side frame tube.
• Attach the tilt protection with the M6x35
bolt and locknut M6 in the hole in the frame
provided.
When the anti-tilt rollers are raised, the tilt
protectors can also be used for tipping assistance.
If required, a safety belt is available as an
accessory. This is mounted on the side frame of the
wheelchair with the side part either temporarily
removed or swung away (Fig. 42). Take the open
end of the belt once around the side frame tube
and fix it with the belt buckle.
Length adjustment is also carried out with the belt
buckle. Adjust the belt length such that the belt sits
firmly but does not apply pressure.
ORDER NOW >
Sovereign Wheelchair
1800 267 267 > activemedicalsupplies.com.au
29