Maintenance & Storage; Safetydecals - Simplicity 1691411 Operator's Manual

Never operate machine at high transport speeds on
l
slippery surfaces. Use care when backing up.
Disengage auger drive when transporting or not in
l
use.
Never operate the snowthrower without good vrstbrlrty
l
or light. Always be sure of your footing.
Do not change the engine governor settings or over-
l
speed the engine.
MAINTENANCE & STORAGE
the equipment is in safe operating condition.
Never store equipment with gasoline in the tank in a
l
building where fumes may reach an open flame or
spark. Allow the engine to cool before storing in any
enclosure.
DANGER
A
Part No. 1677488
Avoid injury from
rotating blower:
Shut 011 engine
discharge chute.
- - -
Decal supplied by the engine manufacturer.
See your local Tecumseh dealer.
Always refer to the Operator's Manual for important
l
details if snowthrower is to be stored for an extended
period.
Run auger drive a few seconds after completion of
l
throwing snow to help clear out snow and prevent
freeze-up.

SAFETYDECALS

Safety warning decals are placed at strategic locations
on the snowthrower as a constant reminder to the opera-
tor of the most important safety precautions. All warning,
caution and instructional messages on your snowthrower
should be carefully read and obeyed.
If any of these decals are lost or damaged, replace them
at once. They can be purchased from your local dealer.
A
q -zjzJEJ
Part No. 1677485
3
Safety Rules