NEC SL2100 Quick User Manual page 2

Redial
Last dialed number
•
Lift the handset and press #5 to initiate the call
Recently dialed numbers
•
Without lifting handset press Redial (Right Cursor key).
•
Press the Cursor button up or down to search for the required number
•
Lift the handset to initiate the call
Conference
With a call in progress (internal or external)
•
Press the More soft key and then the Conf
soft key
•
Dial an internal or external number
•
When the third party answers, press the
Add soft key
Repeat the above 3 steps until all parties are in the conference. Then press the
Begin soft key to begin the conference
Note: Any party may exit the conference by hanging up. As long as at least one of the
parties is an extension on the phone system the conference will remain active.
Call Pick Up
To answer a ringing extension in your group:
•
Lift the handset and dial * #
To answer a call ringing at a specific extension:
•
Lift the handset and dial * *
plus the other extensions number
Call Park
To park a call in the system and retrieve from any other extension
•
Ask the caller to hold then press Transfer
•
Dial the Call Park access code #6
•
Enter a park position (01-64)
Call or Page the desired staff member to retrieve the call from the allocated park
position.
Note: If the park position you select is in use you will receive busy tone.
To retrieve a parked call
•
Dial the Answer Park access code *6
•
Enter a park position (01-64)
Note: If the parked call is not picked up it will recall to the original extension.