Standby Mode; Operating The Appliance - V-ZUG WS 60 144 Operating Instructions Manual

2 General appliance description
2.4

Standby mode

The standby mode refers to the state of the drawer when the function is temporarily de-
activated, but can be reactivated at any time and without any preparation or lengthy wait-
ing times. Open the drawer and it is ready for operation. The
to indicate the appliance is ready for operation. Pressing the
ance on and the desired operating mode required can be selected.
Operation
Your warming drawer is equipped with a safety shut-off that switches the drawer to the
standby mode after a maximum of 12 hours of continuous operation.
Switching the «standby mode» off
The button is dimmed.
▸ Touch .
– The button illuminates.
– The recommended value illuminates.
The desired operating mode required
can be selected.
2.5

Operating the appliance

The operating panel must be kept clean and dry. Wash and dry your hands. The
buttons will otherwise not react or can come on accidentally.
▸ Touch the button to switch the drawer on.
▸ Tap or repeatedly to set the required temperature and duration, or use one of
the four preset operating modes (see page 13) with adjustable temperature and dur-
ation settings.
If you do not adjust any settings, the settings (i.e. temperature and duration) from
the last time the drawer was used are retained.
▸ Close the drawer.
– Operation starts; the pilot lamp illuminates if the drawer is closed.
▸ Opening the drawer interrupts operation.
– The pilot lamp flashes if the drawer is open.
– Close the drawer to continue the programme.
▸ When the set duration is up, an acoustic signal is emitted.
– The button is dimmed in the standby mode.
Do not leave the warming drawer unattended for longer periods of time when us-
ing continuous operation. Keeping food warm overly long can dry it out and even
cause it to catch fire.
Your warming drawer is equipped with a safety shut-off that switches the drawer to
the standby mode after a maximum of 12 hours of continuous operation.
10
button illuminates dimly
button switches the appli-