Related Manuals for NightWatcher SWNW520
Summary of Contents for NightWatcher SWNW520
- Page 1 Model # SWNW520 USE AND CARE GUIDE ROBOTIC SECURITY LIGHT MOVEMENT TRACKING LED FLOOD LIGHT Questions, problems, missing parts? Before returning to the store, call Streetwise Security Products Customer Service at 1-866-220-0272...
-
Page 2: Table Of Contents
Warranty 12 MONTH WARRANTY Streetwise Security Products extends a 12-month warranty to the SWNW520 against defects in materials or workmanship, with the following exceptions: 1. The warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or improper installation. -
Page 3: Pre-Installation
Pre-Installation WARNING: PLEASE READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. Never attempt to turn the light head by hand as this will damage the internal motor components and void the warranty. -
Page 4: Pre-Installation
Pre-Installation (continued) PACKAGE CONTENTS NOTE: The intelligent motion sensor tracking light is designed to illuminate when the detection area is entered by a person and will detect a moving heat source. There is no guarantee implied that it will provide total security or prevent illegal entry. Part Description Quantity... -
Page 5: Installation
(EE). Make sure the base bracket (B) is Green/yellow to green/yellow straight. □ Tighten the two central screws and one base bracket screw (FF). Do not use excessive force. The recommended installation height of the NightWatcher is between 6.5-10ft. -
Page 6: Operation
Operation Detection range Function □ This light is equipped with three motion sensors: □ When power is first turned on the light will go to zone1 covers 60 degrees, zone 2 covers 100 self-calibration mode for about 1 minute. degrees and zone 3 covers 60 degrees. There is a □... - Page 7 Operation (continued) Testing the light fixture Ensuring correct operation □ To ensure correct operation of the sensor, NOTE: mount the unit so that the motion passes Allow for approximately 1-minute calibration time before across the motion sensor according to the the sensors resume normal activity.
-
Page 8: Care And Cleaning
Care and Cleaning □ Use a soft cloth for cleaning the light front cover. □ Remove dirt or stains with a soft cloth dampened with water or neutral detergent. IMPORTANT: Do not open this product for unauthorized service. This could cause serious damage to the unit and will void the warranty. - Page 9 Retain this manual for future use.