Introduction and System Requirements
Thank you for purchasing the Belkin Components
Adapter. Now, you can easily add up to seven SCSI devices on
your Windows
®
98 PC or Mac
®
through a USB port! No more
opening your computer case, no more IRQ conflicts or driver
problems! Simply plug it in!
Your PC must have:
• 486 processor or faster
• 16MB memory or more
• A free USB port (on the computer or a hub)
• Windows
98, Windows
98 SE, or Windows
®
®
Your Macintosh
must have:
®
• OS 8.6 or higher
• A free USB port (on the computer or at a hub)
Notes:
1.
It is NOT recommended that you plug in the USB SCSI
Adapter to the USB ports on the iMac
keyboard does not supply enough power, and is a
low-speed device.
2.
If you own a non-iMac
™
machine, such as a PowerMac or
G3, and wish to add USB ports, please obtain a Belkin USB
BusPort
for Mac
(model # F5U005-MAC).
™
®
Your SCSI device must be able to supply termination power to
the USB SCSI Adapter. Some devices, such as Iomega
Zip
Drives and some brands of scanners, will not be able to
®
provide the required +5V termination power. In such an event,
a SCSI device that can provide termination power must be
connected to the device chain or an optional power supply
adapter, available for purchase from Belkin (Part# F5U115xPWR
can be used).
If you are going to plug the USB SCSI Adapter into a USB
Hub, make sure that it is a self-powered hub.
(A self-powered hub has its own power supply.)
1
®
USB SCSI
2000
®
™
keyboard. The