Espressotoria CAPRISTA Instruction Manual page 10

ENERGY SAVING MODE / PROGRAMMING THE AMOUNT OF WATER
7.
Energy Saving Mode
If the machine is not being
used, after 5 minutes
the energy saving mode
is activated and the
absorbed power falls to 0.5
Watt. The energy saving
mode is indicated by the
"small cup" dispensing
button lighting up in green.
To use the machine press
one of the dispensing
buttons. The machine is
ready to dispense coffee
as soon as the buttons are
steadily lit.
If the machine is not used
for an extended period of
time (for example, during
vacations), ensure the
machine is switched off,
empty the water tank, turn
the power off, then pull
the power plug from the
electrical outlet.
Switch to long ready
mode
Switch off the machine
and close the handle. Then
switch the machine "ON"
again while pressing the
"large cup" button.
Keep the button pressed
until it glows blue.
The machine will stay
ready now for max.
4 hours. After 4 hours, the
machine returns to Energy
Safe Mode automatically.
To return to the normal
energy saving mode,
switch the it on again while
pressing the «small cup»
button. Keep it pressed
until it glows blue.
8.
Programming the amount of water
3 sec.
You can program the
amount of water for the
two coffee dispensing
buttons:
• Press the button
for 3 seconds to be
programmed (for an
example for an espresso)
until it has a blue color
and flashing rapidly.
The dispensing cycle
commences
• Once the desired amount
of water is reached, press
the button again. The
dispensing programming
stops and the amount of
water is programmed when
both buttons are lit.
Programmable quantity
of coffee. The same for
both buttons:
Small Cup (Min 30ml/1fl.oz
to Max 220ml/7.4fl.oz)
Large Cup (Min 30ml/1fl.oz
to Max 220ml/7.4fl.oz)
To return to the default
settings, press both
buttons simultaneously
for 3 seconds (until both
glow blue). The default
quantities are:
Small cup,
30ml/1fl.oz
•
Large cup
100ml/3.4fl.oz
•