Hide thumbs Also See for DSM Series:

Advertisement

Quick Links

WTI Part No.: 14451
Rev.: C
DSM Series
Console Server
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for WTI DSM Series

  • Page 1: Quick Start Guide

    WTI Part No.: 14451 Rev.: C DSM Series Console Server Quick Start Guide...
  • Page 2: Warnings And Cautions

    Warnings and Cautions: Installation Instructions Secure Racking If Secure Racked units are installed in a closed or multi-unit rack assembly, they may require further evaluation by Certification Agencies. The following items must be considered. 1. The ambient within the rack may be greater than room ambient. Installation should be such that the amount of air flow required for safe operation is not compromised.
  • Page 3: Hardware Installation

    Introduction This Quick Start Guide describes a simplified installation procedure for our DSM Series units, which will allow you to communicate with the unit in order to demonstrate basic features and check for proper operation. Note that this Quick Start Guide does not provide a detailed description of unit configuration, or discuss advanced operating features in detail.
  • Page 4 DSM Series - Console Servers; Quick Start Guide Communicating with the DSM When properly installed and configured, the DSM will allow command mode access via Telnet, Web Browser, SSH client, modem, or local PC. However, in order to ensure security, both Telnet and Web Browser access are disabled in the default state.
  • Page 5 DSM Series - Console Servers; Quick Start Guide Username / Password Prompt: A message will be displayed, which prompts you to enter your username (Login) and password.. The default username is "super" (all lower case, no quotes), and the default password is also "super".
  • Page 6 DSM User’s Guide for important information regarding advanced configuration capabilities and more detailed operation instructions. If you have further questions regarding the DSM unit, please contact WTI Customer Support as described in the User’s Guide. Page 6...
  • Page 7: Industry Canada

    DSM Series - Console Servers; Quick Start Guide FCC Part 15 Regulation This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 8 5 Sterling • Irvine • California 92618 (949) 586-9950 • Toll Free: 1-800-854-7226 Fax: (949) 583-9514 • http://www.wti.com...

Table of Contents