Table of Contents
Advertisement
Figure 18: Flown 750-LFC with GuideALink Attachments
The 750-LFC's four corner link slots on the top of the cabi-
net accept GuideALinks from flown 750-LFCs. The front and
rear/middle link connect to LINA GuideALinks slots when
flying LINAs below the 750-LFC (see Figure 18). The config-
uration of 750-LFCs GuideALinks, front and rear/middle,
determines the LINAs splay angle.
The MG-MINA/LINA/750 grid's front and rear/middle link
slots also accept links from the 750-LFC grid when ground-
stacking the 750-LFC (see Figure 19). The configuration of
the grid's links, whether set to A or B, determines the angle
of attachment for the groundstacked 750-LFC.
Figure 19: Groundstacked 750-LFC with GuideALink Attachments
The 750-LFC's front and rear GuideALinks are used when
attaching a LINA groundstack on top of the 750-LFC (see
Figure 19).
CAUTION:
Do not use the rear/middle GuideA-
Links when flying the 750-LFC below the MG-
MINA/LINA/750 grid or when flying below another
750-LFC. Always use the front and rear GuideALinks
when flying the 750-LFC.
NOTE:
When flying the 750-LFC below the
MG-MINA/LINA/750 grid, a splay angle of
0 degrees is recommended for the top cabinet (rear
GuideALinks set to 0, front GuideALinks set to 0) to
ensure that the cabinet aligns with any lasers or incli-
nometers mounted on the grid. To add tilt to the top
cabinet, the actual grid should instead be tilted. For
more information, see available at
sound.com).
750-LFC OPERATING INSTRUCTIONS
www.meyer-
23
Hide quick links:
Advertisement
Table of Contents
