Page 1
Dev Dolly Pro User Manual For more information please visit our website: www.glidegear.net...
Page 2
What’s in the box (1) Sled (2) 4x sets of wheels (3) 2x end spacers (4) 1x low profile spacer (5) 7.5” camera riser (6) Camera plate, 75mm and 100mm bowl adapters (7) 3x Baby pin adapters (8) 2x Anti-tilt brackets (9) Carry Case For more information please visit our website: www.glidegear.net...
Page 3
Use the supplied long thumb screws to 1”to 2” pipes lock the track into position. (25mm-50mm) Height The Dev Dolly Pro can accommodate adjustment tracks from 1” to 2” in diameter (25 to 50mm). For more information please visit our website: www.glidegear.net...
Page 4
Assembly Mount the anti-tilt brackets on each side of the sled. Anti-tilt bracket Adjust the position of the bracket so it goes under the track to prevent the sled from tilting out. Bracket adjustment For more information please visit our website: www.glidegear.net...
Page 5
In addition, 3 baby stand adapters are supplied. Simply screw the adapter at the bottom of a spacer Baby pin adapter to mount the Dev Dolly Pro onto a baby stand. For longer tracks, it is recommended to place the low profile spacer in the middle for extra support.
Page 6
Camera Mounting Options The Dev Dolly Pro includes: a 7.5”camera riser, a 75mm bowl adapter and a 100mm bowl adapter. The bowl adapters can be used directly on the sled or on the camera riser. To mount a bowl adapter onto the sled or the riser: ...
Need help?
Do you have a question about the Dev Dolly Pro and is the answer not in the manual?
Questions and answers