Usb Mass Storage Emulation - Datamars R-IN1300 MC User Manual

Note: If the USB-Cable is unplugged, the USB-Serial-Communication stops. If now you plug the
USB-Cable in, the USB-Serial-Communication will NOT start! After unplugging, you have to close
the terminal, plug the USB-Cable again and open a new terminal.
6.2 USB M S
ASS
To use the mass storage emulation please follow carefully the following instructions.
At the beginning of the manipulation, the reader is assumed to be turned off.
Make sure that your PC and the "R-IN1300 MC Advanced" are NOT connected via USB-cable
•
Turn the reader on
•
If not yet selected, activate the "USB Mass Storage Emulator" functionality with *us2" (on
•
terminal) or via GUI
Start reading: the detected UIDs are written into the journal-file (duplicated UIDs are filtered –
•
each UID is written only once)
R-IN 1300 MC User Manual – Rev 6.0
E
TORAGE MULATION
ARM: 4.0.0 / DSP 2.1.4 Type: MC
DATAMARS
38 (50)