Spray Function; Ironing Without Steam - Blaupunkt 335235 Owner's Manual

SPRAY FUNCTION

— Press the spray button at any time to spray water on clothes,
as often as required
NOTE: Ensure that there is enough water in the tank to use
the spray function.
During first use, you may have to pump the spray button
several times to start the spraying function.
USING THE STEAM JET
1. This function provides an extra amount of steam
to remove stubborn creases
2. Turn the temperature control to the position "MAX". The indicator light turns off when the
required temperature is reached.
3. Press the steam jet button once
4. Wait a few seconds before pressing the steam jet button again
5. When there are stubborn creases usually all creases can be removed within three operations of
the steam jet
STEAM-IRONING
1. Ensure that there is enough water in the water tank
2. Set the required temperature. Water may leak from the sole plate if too low of a temperature
has been selected
3. Once the required temperature has been reached the power indicator light will turn off
4. Increase the steam output by pulling the Steam Button backwards and decrease the output by
pushing the Steam Button forward
5. The supplied brush enables the steam produced to gain deeper access to the material and is
ideal for thicker cloth such as drapes/curtains

IRONING WITHOUT STEAM

Press the steam control button so that it is in the down position. Set a temperature suitable for
your fabric.
7