Table of Contents
Advertisement
TROUBLESHOOTING
Problem
The appliance does not produce any steam
The iron leaves a shine or an imprint
on the garment
The ironing board cover becomes wet or
water droplets come out of the soleplate
There is too much steam coming out of the iron
Possible Solution
Fill the water tank beyond the MIN indication.
Press and hold the steam trigger until steam
comes out. It may take up to 30 seconds until
steam comes out. Press the steam trigger and
keep it pressed when you iron.
The surface to be ironed was uneven, for
instance because you were ironing over a seam
or a fold in the garment
Steam has condensed on the ironing board
cover after a long ironing session
The default setting of the iron is the Optimal
Temp setting. In this setting the iron provides a
high steam output.
10
Hide quick links:
Advertisement
Table of Contents
