PEUGEOT 508 Handbook page 224

In the event of a breakdown
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
Ensure that the jack is stable. If the
ground is slippery or loose, the jack may
slip or drop – risk of injury!
Position the jack strictly at one of the
jacking points, A or B, under the vehicle,
ensuring that the head of the jack is
centred under the contact area on the
vehicle. Otherwise, there is a risk of
damage to the vehicle and/or the jack
collapsing – risk of injury!
222
Fitting a wheel
Fitting a steel or "space-saver" spare
wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting it is
normal to notice that the washers do not
come into contact with the steel or "space-
saver" spare wheel. The wheel is secured
by the conical contact of each bolt.
F Put the wheel in place on the hub.
F Screw in the bolts by hand as far as
possible.
F Pre-tighten the security bolt using the
wheelbrace 5 fitted with security socket 2.
F Pre-tighten the other bolts using wheelbrace
5 only.
F Lower the vehicle again fully.
F Fold jack 6 and detach it.
F Tighten the security bolt using the
wheelbrace 5 fitted with security socket 2.