PEUGEOT 508 Handbook page 11

As a safety measure, these adjustments
must be carried out with the vehicle
stationary.
Choosing a display colour
This depends on the ambience activated by the
i-Cockpit® Amplify function.
Depending on version, it can be selected in the
setting of a profile in the Settings menu of the
touch screen.
The possible choices are:
F "Relax": grey,
F "Boost": red,
F "Normal" (no ambience activated): blue.
For more information on the i-Cockpit®
Amplify function, refer to the corresponding
section.
Choice of display mode
To modify the display mode of the instrument
panel:
F Turn the knob located to the left of the
steering wheel to display and scroll through
the different modes on the right-hand side
of the instrument panel.
F Once the selected display mode appears,
press on the knob to validate.
If the knob is not moved, the selected display
mode is automatically applied after a few
moments.
Each mode corresponds to the type of
information displayed in the instrument panel.
- "DIALS": standard display of the analogue
and digital speedometers, the rev counter,
the fuel gauge, the engine coolant
temperature indicator and the total distance
recorder.
- "NAVIGATION": standard display,
additionally showing the current navigation
information (map and navigation
instructions).
- "DRIVING": standard display, additionally
showing the current driving aid systems
information.
- "NIGHT VISION": standard display,
additionally showing the display of the
infrared camera image (associated with the
Night Vision function).
- "MINIMAL": minimal display with digital
speedometer and the total distance
recorder and, in the event of a warning
only, the fuel gauge and the engine coolant
temperature indicator.
- "PERSONAL": minimal display and
possibility of selecting optional information
to be displayed in the customisable areas
on the left and right.
To enter settings for the "PERSONAL"
display mode and select the information to
be displayed in the customisable areas of the
instrument panel:
With 8" touch screen
F Press Settings in the upper
banner of the touch screen.
F Select "Configuration".
F Select "Instrument panel
personalisation".
Instruments
1
9