Table of Contents
Advertisement
3. Loosely attach the servo system to the mounting position using four mounting
bolts, washers and possibly nuts. Use bolts that do not protrude beyond the
mounting ring.
4. Adjust the position of the servo system so that the paint
marks on the mounting position and mounting ring are in
line with the stop pin.
5. Using a level, adjust the position of the servo system so that it is reasonably level.
6. Once the servo system is completely level, secure the four M6mounting bolts.
Watson Industries, Inc.
SMS-P233 Rev B 10/17/2017
8
Advertisement
Table of Contents
