Table of Contents
Advertisement
The term "WARNING!" indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term "CAUTION!" indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in
damage to the equipment that may not be covered under the warranty.
The term "IMPORTANT!" indicates instructions or information that are vital to the successful completion of the procedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
WARNRNG!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
Elevated Operating Ambient – The ambient operating temperature of the installation environment may
be greater than room ambient. Consideration should be given to ensure that the maximum operating
temperature range (0°C to 50°C, 32°F to 122°F ) is not exceeded. Reduced Air Flow – Installation of the
equipment should be such that the amount of air flow required for safe operation of the equipment is
not compromised.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Do not submerge the apparatus in water or liquids.
7.
Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8.
Clean only with a dry cloth.
9.
Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
10. Keep all ventilation openings free of dust or other matter.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
12. Only use attachments/accessories specified by the manufacturer.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. Adhere to all applicable local codes.
15. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
TD-001577-01-B
EXPLANATION OF TERMS AND SYMBOLS
IMPORTANT SAFETY INSTRUCTIONS
2
Advertisement
Table of Contents
