Trim Options; Coin Turn; Coin Turn And Plug; Do Not Disturb" Indicator - Schlage L-Series Service Manual

Trim Options

Coin Turn

L283-124
Coin Turn for rose trim.
Specify finish and door
thickness. Available with Torx
screws, specify L283-056.

Thumbturn

09-509
Thumbturn for deadbolt functions and
privacy locks with rose trim. Specify finish
and door thickness.
"EZ" Thumbturn (ADA) for
Rose Trim
09-509 per L583-363*
Not available for L463 and L9463 functions.
* EZ turn is not available on doors less than 1⁵⁄₈'' thick.
NOTE: When ordering trim parts, specify the complete design and finish (e.g. 09-633 03L 605).
Coin Turn and
Plug
09-900 x XL12-196
Specify finish and door
thickness.

ADA Cylinder Turn

XB11-720
Available with L463 and L9463 locks.
Specify per XB11-720, dimension, finish,
and door hand. If handing is not required,
specify NH (non-handed). When ordered
alone, specify either 09-900, 09-904,
09-905, or 09-907 per XB11-720.
"EZ" Thumbturn (ADA) x
Knob/Lever with L or N
Escutcheon
09-633 per L583-363*
L N
Not available for L9463 functions.
"Do Not Disturb"
Indicator
09-611

Cylinder Turn

09-900
09-900 through 09-907
Cylinder Classroom turns are furnished
with L463 and L9463 locks. Specify
dimension, finish, and door hand.
If handing is not required, specify NH
(non-handed). For instructions on
changing hand, see page 117.
"EZ" Thumbturn (ADA) x
Blank with L Escutcheon
09-634 per L538-363*
Not available for L9463 functions.
L
Service Manual
"Occupied"
Indicator
09-611 x L583-375
L
97