Schlage L460 Service Manual
  1. Manuals
  2. Brands
  3. Schlage Manuals
  4. Locks
  5. L460
  6. Service manual

Schlage L460 Service Manual

L-series
Hide thumbs Also See for L460:
Table of Contents

Advertisement

Quick Links

L-Series
Service manual

Advertisement

Table of Contents
loading

Related Manuals for Schlage L460

Summary of Contents for Schlage L460

  • Page 1 L-Series Service manual...

  • Page 3: Table Of Contents

    101 Assembly of lock case parts 53 L400 Trim assemblies chart 103 Trim options Cast or forged levers, standard lever designs 54 Lock case assemblies L460, L462, L463, L464, L480, L496 104 Decorative trim L9010 Decorative levers LM9310, LM9325 Decorative roses...
  • Page 4 130 Request to exit (RX) feature 130 Latch monitoring 131 Multipoint lock, LM9300 Series 132 Lubrication specifications 133 Door handing Changing the lock hand Changing cylinder turn hand 134 Ordering procedures 135 Finishes 135 Limited warranty iv • Schlage • L-Series service manual...

  • Page 5: Introduction

    Introduction Introduction This manual contains a complete listing of parts and assemblies for L-Series mortise locks manufactured by Schlage Lock Company. This edition lists components of L-Series locks manufactured after June, 2001. All lock case covers are labeled with the date of manufacture. Example: 8/15/13 = August 15, 2013.

  • Page 6: Dot Charts

    • • 30-001 Classic Mortise Cylinder All parts shown in dot charts are standard. Additional options may be available. See current Schlage Commercial Price Book for available options, pricing and ordering procedures. Changes and additions Additions L-Series trim options The M Collection decorative lever options are now available with L-Series locks.

  • Page 7: Lock Assembly Drawing Index

    Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • L-Series service manual • 7...
  • Page 8 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. 8 • Schlage • L-Series service manual...
  • Page 9 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. Schlage • L-Series service manual • 9...
  • Page 10 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. 10 • Schlage • L-Series service manual...
  • Page 11 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. Schlage • L-Series service manual • 11...
  • Page 12 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. 12 • Schlage • L-Series service manual...
  • Page 13 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. Schlage • L-Series service manual • 13...
  • Page 14 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. 14 • Schlage • L-Series service manual...
  • Page 15 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Not sold separately as a part.  Available with Request to Exit feature. Schlage • L-Series service manual • 15...
  • Page 16 For use with Multipoint lock system only. LM9325 Exit lock function multipoint L283-314 Latchbolt is always retracted by inside knob/lever. No outside trim. Auxiliary latch deadlocks latchbolt when door is closed. For use with Multipoint lock system only. 16 • Schlage • L-Series service manual...
  • Page 17 Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety hazard in times of emergency, and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • L-Series service manual • 17...
  • Page 18 ANSI/BHMA A156.13, 1994, Series 1000, Grade 1 assembly assembly page no. Non-keyed L400-Series page no. page no. SCHLAGE ANSI Description L480 Door Bolt L283-099 Deadbolt is operated by thumbturn on one side. No trim on opposite side 18 • Schlage • L-Series service manual...

  • Page 19: Trim Assemblies

    Trim assemblies Single dummy trim Double dummy trim L400-Series deadbolt trim Passage latch trim Exit trim Emergency button x turn trim Privacy x turns both sides trim Coin turn outside x turn trim Cylinder x turn trim Double cylinder trim Cylinder outside trim Electrically locked/unlocked both sides trim Active double dummy trim...

  • Page 20: Single Dummy Trim

    Trim assemblies Single dummy trim L0170 Levers Knobs NOTE: Reinforcement required for metal door applications. See Schlage Door Preparation Manual & Template Guide. 20 • Schlage • L-Series service manual...

  • Page 21: Double Dummy Trim

    Trim assemblies Double dummy trim L0172 Levers Knobs NOTE: Reinforcement required for metal door applications. See Schlage Door Preparation Manual & Template Guide. Schlage • L-Series service manual • 21...

  • Page 22: L400-Series Deadbolt Trim

    Trim assemblies L400-Series deadbolt trim L460, L462, L463, L464, L480, L496 L460P L462P L463P L464P L496 L480 NOTE: Standard full face mortise cylinder shown. 22 • Schlage • L-Series service manual...

  • Page 23: Passage Latch Trim

    Trim assemblies Passage latch trim L9010, LM9310 Levers Knobs NOTE: LM9310 lock function has latch and auxiliary latch. Lock case and armor front shown with latch only. Schlage • L-Series service manual • 23...

  • Page 24: Exit Trim

    Trim assemblies Exit trim LM9325 Levers Knobs 24 • Schlage • L-Series service manual...

  • Page 25: Emergency Button X Turn Trim

    Trim assemblies Emergency button x turn trim L9040, LV9040, L9440, LV9440 Levers Knobs NOTE: L9440 and LV9440 lock functions have latch and deadbolt. Lock case and armor front shown with latch only. Schlage • L-Series service manual • 25...

  • Page 26: Privacy X Turns Both Sides Trim

    Trim assemblies Privacy x turns both sides trim L9040 x XL11-446, LV9040 x XL11-446 Levers Knobs 26 • Schlage • L-Series service manual...

  • Page 27: Coin Turn Outside X Turn Trim

    Trim assemblies Coin turn outside x turn trim L9044, LV9044, L9444, LV9444 Levers Knobs NOTE: L9444 and LV9444 lock functions have latch and deadbolt. Lock case and armor front shown with latch only. Schlage • L-Series service manual • 27...

  • Page 28: Cylinder X Turn Trim

    NOTES: L9456, LV9456, and L9473 lock functions have a latch and deadbolt. Lock case and armor front shown with latch and auxiliary latch. L/LV9453 lock functions have a latch, auxiliary latch, and deadbolt. Lock case and armor front shown with latch and auxiliary latch only. Standard full face mortise cylinder shown. 28 • Schlage • L-Series service manual...

  • Page 29: Double Cylinder Trim

    L9458 & LV9458 lock functions have a latch, auxiliary latch & deadbolt. Lock case and armor front shown with latch and auxiliary latch. L9462 x XL11-886 lock function has deadbolt only. Lock case and armor front shown with latch and auxiliary latch. Standard full face mortise cylinder shown. Schlage • L-Series service manual • 29...

  • Page 30: Cylinder Outside Trim

    NOTES: L9465 lock function has a latch and deadbolt. Lock case and armor front shown with latch and auxiliary latch. L9464 x XL11-886 lock function has deadbolt only. Lock case and armor front shown with latch and auxiliary latch. Standard full face mortise cylinder shown. 30 • Schlage • L-Series service manual...

  • Page 31: Electrically Locked/Unlocked Both Sides Trim

    Trim assemblies Electrically locked/unlocked both sides trim L9082EL/EU Levers DD Q Knobs NOTE: Standard full face mortise cylinder shown. Schlage • L-Series service manual • 31...

  • Page 32: Active Double Dummy Trim

    Trim assemblies Active double dummy trim L9110 x XL11-741 Levers Knobs 32 • Schlage • L-Series service manual...

  • Page 33: Single Dummy With Case Trim

    Mount in place of blank armor. Knobs For discontinued function L9177 order L9175 and armor strike separately and specify hand of inactive door. Mount in place of blank armor. Schlage • L-Series service manual • 33...

  • Page 34: Double Dummy With Case Trim

    Mount in place of blank armor. Knobs For discontinued function L9178 order L9176 and armor strike separately and specify hand of inactive door. Mount in place of blank armor. 34 • Schlage • L-Series service manual...

  • Page 35: Deadbolt Trim

    Trim assemblies Deadbolt trim L9460, L9462, L9463, L9464 L9460P L9462P L9463P L9464P NOTE: Standard full face mortise cylinder shown. Schlage • L-Series service manual • 35...

  • Page 36: Deadbolt With Fixed Double Dummy Trim

    Trim assemblies Deadbolt with fixed double dummy trim L9460 x XL11-635 Levers Knobs NOTE: Standard full face mortise cylinder shown. 36 • Schlage • L-Series service manual...

  • Page 37: Fixed Outside X Turn Trim

    L9460 x XL11-886, L9480, LV9480, L9485, LV9485 Levers Knobs NOTES: L9460 x XL11-886 lock function has a deadbolt only. Lock case and armor front shown with latch, auxiliary latch, and deadbolt. Standard full face mortise cylinder shown Schlage • L-Series service manual • 37...

  • Page 38: Institution Deadbolt Trim

    Trim assemblies Institution deadbolt trim L9482 x XL11-543, LV9482 x XL11-543 Levers DD Q Knobs NOTE: Standard full face mortise cylinder shown. 38 • Schlage • L-Series service manual...

  • Page 39: Prison Lock Trim

    Trim assemblies Prison lock trim L9485 x XL11-557 NOTE: Standard full face mortise cylinder shown. Schlage • L-Series service manual • 39...

  • Page 40: Hotel With Indicator Trim

    L9486, LV9486, L9486 x L583-375, LV9486 x L583-375, L9496, LV9496 Levers Knobs NOTES: L9496 and LV9496 lock functions have a latch and deadbolt. Lock case and armor front shown with latch, auxiliary latch, and deadbolt. Standard full face mortise cylinder shown. 40 • Schlage • L-Series service manual...

  • Page 41: L9000 Trim Assemblies Chart

    • • • • • • 09-633 thumbturn L and N x full • • • • • • • • 09-635 face cylinder ‡ Not sold separately as a part. Available with rose trim only. Schlage • L-Series service manual • 41...
  • Page 42 Not sold separately as a part. *** Not available with N escutcheon. Available with rose trim only. L9486 and LV9486 available with “Occupied” indicator option. Specify 09-611 x L583-375. Available with knob x rose trim only. 42 • Schlage • L-Series service manual...
  • Page 43 Not sold separately as a part. Available with rose trim only. Not available with N escutcheon. NOTE: Standard cylinder part numbers are shown for cylinder function locks. See page 115 for other cylinder options. Schlage • L-Series service manual • 43...
  • Page 44 *** Not available with N escutcheon. L9486 and LV9486 available with “Occupied” indicator option. Specify 09-611 x L583-375. NOTE: Standard cylinder part numbers are shown for cylinder function locks. See page 115 for other cylinder options. 44 • Schlage • L-Series service manual...
  • Page 45 Not sold separately as a part. Available with rose trim only. Not available with N escutcheon. NOTE: Standard cylinder part numbers are shown for cylinder function locks. See page 115 for other cylinder options. Schlage • L-Series service manual • 45...
  • Page 46 *** Not available with N escutcheon. L9486 and LV9486 available with “Occupied” indicator option. Specify 09-611 x L583-375. NOTE: Standard cylinder part numbers are shown for cylinder function locks. See page 115 for other cylinder options. 46 • Schlage • L-Series service manual...
  • Page 47 Privacy, LV ‡ Classroom • • L283-172 holdback, LV ‡ ‡ Not sold separately as a part. Available with rose trim only. Available with knob x rose trim only. *** Not available with N escutcheon. Schlage • L-Series service manual • 47...
  • Page 48 Not sold separately as a part. *** Not available with N escutcheon. Available with rose trim only. L9486 and LV9486 available with “Occupied” indicator option. Specify 09-611 x L583-375. Available with knob x rose trim only. 48 • Schlage • L-Series service manual...
  • Page 49 • • • L283-317 entry x multipoint, LV‡ ‡ Not sold separately as a part. Available with rose trim only. Available with knob x rose trim only. *** Not available with N escutcheon. Schlage • L-Series service manual • 49...
  • Page 50 Not sold separately as a part. *** Not available with N escutcheon. Available with rose trim only. L9486 and LV9486 available with “Occupied” indicator option. Specify 09-611 x L583-375. Available with knob x rose trim only. 50 • Schlage • L-Series service manual...
  • Page 51 Lever spacer 10-091 Armor strike Mounting • L283-150 plate Available with rose trim only. Available with knob x rose trim only. Available with knob x rose trim only. *** Not available with N escutcheon. Schlage • L-Series service manual • 51...
  • Page 52 Mounting L283-150 plate Available with rose trim only. Available with knob x rose trim only. *** Not available with N escutcheon. L9486 and LV9486 available with “Occupied” indicator option. Specify 09-611 x L583-375. 52 • Schlage • L-Series service manual...

  • Page 53: L400 Trim Assemblies Chart

    Case mounting screw pack Escutcheon thru-bolts/screws: • • • • • • K110-020 Armor screw pack Assembled lock case: • • • • • • L283-099 L400 deadbolt • • • • L583-195 Compression spring Schlage • L-Series service manual • 53...

  • Page 54: Lock Case Assemblies

    Lock case assemblies L460, L462, L463, L464, L480, L496 L9010 LM9310, LM9325 L9040, L9040 x XL11-446, L9044 LV9040, LV9040 x XL11-446, LV9044 L9050, L9060, L9070, L9071 LV9050, LV9060, LV9070, LV9071 LM9350, LM9370, LM9371 LMV9350, LMV9370, LMV9371 L9056 LV9056 L9076, L9077...

  • Page 55: L460, L462, L463, L464, L480, L496

    Lock case assemblies L460, L462, L463, L464, L480, L496 Assembled Lock Case L283-099 Number Description Part Number Deadbolt L283-003 Cylinder Plate & Screw L283-055 L400 Lock Case L283-128 Turn Hub L583-029 Turn Hub Spring L583-035 L583-426 ” Faceplate Tab Case Cover Screws...

  • Page 56: L9010

    Fire Door Fuse L583-027 Fire Door Catch L583-028 Auxiliary Bar Guide L583-038 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Lock Case Cover L583-496 See "Assembly of lock case parts" on page 101. 56 • Schlage • L-Series service manual...

  • Page 57: Lm9310, Lm9325

    L583-044 Auxiliary Stop L583-196 L583-426 ” Faceplate Tab Case Cover Screws L583-454 LM9000 Lock Case L283-312 LM9000 Lock Case Cover L583-491 Locking Link L583-505 Lifter L583-506 See "Passage latch trim" on page 23. Schlage • L-Series service manual • 57...

  • Page 58: L9040, L9040 X Xl11-446, L9044

    L583-048 Link Pin L583-050 Simultaneous Retractor L583-058 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Lock Handing Screw L583-485 Lock Case Cover L583-496 (couple before assembly) See "Passage latch trim" on page 23. 58 • Schlage • L-Series service manual...

  • Page 59: Lv9040, Lv9040 X Xl11-446, Lv9044

    Lock Handing Screw L583-485 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch 24061897 (couple before assembly) See "Passage latch trim" on page 23. Schlage • L-Series service manual • 59...

  • Page 60: L9050, L9060, L9070, L9071

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly) See "Passage latch trim" on page 23. 60 • Schlage • L-Series service manual...

  • Page 61: Lv9050, Lv9060, Lv9070, Lv9071

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 (couple before assembly) See "Passage latch trim" on page 23. Schlage • L-Series service manual • 61...

  • Page 62: Lm9350, Lm9370, Lm9371

    Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 LM9000 Lock Case L283-312 LM9000 Lock Case Cover L583-491 Locking Link L583-505 Lifter L583-506 (couple before assembly) See "Passage latch trim" on page 23. 62 • Schlage • L-Series service manual...

  • Page 63: Lmv9350, Lmv9370, Lmv9371

    Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 LM9000 Lock Case L283-312 LM9000 Lock Case Cover L583-491 Locking Link L583-505 Lifter L583-506 (couple before assembly) See "Passage latch trim" on page 23. Schlage • L-Series service manual • 63...

  • Page 64: L9056

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly) See "Passage latch trim" on page 23. 64 • Schlage • L-Series service manual...

  • Page 65: Lv9056

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch 24061897 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 65...

  • Page 66: L9076, L9077

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. 66 • Schlage • L-Series service manual...

  • Page 67: Lv9076, Lv9077

    Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 (couple before assembly)** See "Request to Exit (RX) Feature" on page 84. See "Passage latch trim" on page 23. Schlage • L-Series service manual • 67...

  • Page 68: L9080

    L583-426 ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 See "Passage latch trim" on page 23 68 • Schlage • L-Series service manual...

  • Page 69: Lv9080

    Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 See "Passage latch trim" on page 23 Schlage • L-Series service manual • 69...

  • Page 70: Lm9380

    Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 LM9000 Lock Case L283-312 LM9000 Lock Case Cover L583-491 Locking Link L583-505 Lifter L583-506 (couple before assembly) See "Passage latch trim" on page 23 70 • Schlage • L-Series service manual...

  • Page 71: Lmv9380

    Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 LM9000 Lock Case L283-312 LM9000 Lock Case Cover L583-491 Locking Link L583-505 Lifter L583-506 (couple before assembly) See "Passage latch trim" on page 23. Schlage • L-Series service manual • 71...

  • Page 72: L9080El, L9080El-Rx

    59 For RX function * See "Request to Exit (RX) Feature" 84. See "Passage latch trim" on page 23. NOTE: Latch Monitoring feature available with L9080EL-RX. Specify XL12-245 for L9080PEL. See page 82 for more information. 72 • Schlage • L-Series service manual...

  • Page 73: Lv9080El

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 73...

  • Page 74: L9080Eu, L9080Eu-Rx

    59 For RX function * See "Request to Exit (RX) Feature" 84. See "Passage latch trim" on page 23. NOTE: Latch Monitoring feature available with L9080EU-RX. Specify XL12-246 for L9080PEU. See page 82 for more information. 74 • Schlage • L-Series service manual...

  • Page 75: Lv9080Eu

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 75...

  • Page 76: L9082

    Stop Spring L583-044 Transfer Lever L583-051 Spindle Anchor L583-057 Auxiliary Stop L583-196 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 76 • Schlage • L-Series service manual...

  • Page 77: Lv9082

    Auxiliary Stop L583-196 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 Bottom Hub L583-386 Top Hub L583-387 Spacer L583-346 Schlage • L-Series service manual • 77...

  • Page 78: L9082El

    Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 Lock Case w/Microswitch (couple before assembly)** See "Request to Exit (RX) Feature" on 84. See "Passage latch trim" on page 23. 78 • Schlage • L-Series service manual...

  • Page 79: L9082Eu

    Screw Plate L583-492 Lock Case Cover L583-496 Lock Case w/Microswitch n/a (couple before assembly)** 59 For RX function * See "Request to Exit (RX) Feature" on 84. See "Passage latch trim" on page 23. Schlage • L-Series service manual • 79...

  • Page 80: L9110 X Xl11-741

    Retractor Crank L583-025 Hub Spring L583-026 Fire Door Fuse L583-027 Fire Door Catch L583-028 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Lock Case Cover L583-496 See "Passage latch trim" on page 23. 80 • Schlage • L-Series service manual...

  • Page 81: L9175

    Lock case assemblies L9175 Assembled Lock Case L283-144 Part Number Description Number Spindle Anchor Single L583-468 L9000 Lock Case L283-112 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Lock Case Cover L583-496 Schlage • L-Series service manual • 81...

  • Page 82: L9176

    Lock case assemblies L9176 Assembled Lock Case L283-145 Part Number Description Number L9000 Lock Case L283-112 Spindle Anchor L583-057 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Lock Case Cover L583-496 82 • Schlage • L-Series service manual...

  • Page 83: L9440, L9444

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 83...

  • Page 84: Lv9440, Lv9444

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch 24061897 (couple before assembly)** See "Passage latch trim" on page 23. 84 • Schlage • L-Series service manual...

  • Page 85: L9453

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 85...

  • Page 86: Lv9453

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 (couple before assembly)** See "Passage latch trim" on page 23. 86 • Schlage • L-Series service manual...

  • Page 87: L9456, L9457, L9496

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 87...

  • Page 88: Lv9456, Lv9457, Lv9496

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch 24061897 (couple before assembly)** See "Passage latch trim" on page 23. 88 • Schlage • L-Series service manual...

  • Page 89: L9458

    ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 89...

  • Page 90: Lv9458

    Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 (couple before assembly)** See "Passage latch trim" on page 23. 90 • Schlage • L-Series service manual...

  • Page 91: L9460, L9462, L9463, L9464

    Turn Hub L583-029 Turn Hub Spring L583-035 Auxiliary Bar Guide L583-038 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 Schlage • L-Series service manual • 91...

  • Page 92: L9460 X Xl11-635

    Turn Hub Spring L583-035 Auxiliary Bar Guide L583-038 Spindle Anchor L583-057 L583-426 ” Faceplate Tab Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 92 • Schlage • L-Series service manual...

  • Page 93: L9460 X Xl11-886, L9462 X Xl11-886, L9464 X Xl11

    1Z\v” Faceplate Tab L583-426 Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 4 52 See "Passage latch trim" on page 23. Schlage • L-Series service manual • 93...

  • Page 94: L9465, L9466, L9473

    Auxiliary Bar Guide L583-038 1Z\v” Faceplate Tab L583-426 Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 See "Passage latch trim" on page 23. 94 • Schlage • L-Series service manual...

  • Page 95: L9480, L9485, L9486, L9486 X L583-375

    1Z\v” Faceplate Tab L583-426 Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 See "Passage latch trim" on page 23. Schlage • L-Series service manual • 95...

  • Page 96: Lv9480, Lv9485, Lv9486, Lv9486 X L583-375

    Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 Retractor Lever Assy L283-147 Crank Retractor L583-383 Bottom Hub L583-386 Top Hub L583-387 Retractor Catch L583-345 See "Passage latch trim" on page 23. 96 • Schlage • L-Series service manual...

  • Page 97: L9482 X Xl11-543

    L583-196 1Z\v” Faceplate Tab L583-426 Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 97...

  • Page 98: Lv9482 X Xl11-543

    L583-454 Cylinder Retainer Screw L583-481 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before Bottom Hub L583-386 assembly)** Top Hub L583-387 Spacer L583-346 See "Passage latch trim" on page 23. 98 • Schlage • L-Series service manual...

  • Page 99: L9485 X Xl11-557

    L583-426 Case Cover Screws L583-454 Cylinder Retainer Screw L583-481 Lock Handing Screw L583-485 Cylinder Retainer L583-490 Screw Plate L583-492 Lock Case Cover L583-496 (couple before assembly)** See "Passage latch trim" on page 23. Schlage • L-Series service manual • 99...

  • Page 100: Lock Case Assembly Compatibility

    Lock Handing Screw L583-426 L583-427 • Faceplate Tab L583-484 • • • • Lock Case Cover L283-130 • • • • • Lock Case (4-1-94) L283-130 • • • • Lock Case (7-15-94) 100 • Schlage • L-Series service manual...

  • Page 101: Assembly Of Lock Case Parts

    Assembly of lock case parts Assembly of lock case parts Turn hub spring and transfer lever Transfer Lever Turn Hub Spring Auxiliary Bar Guide Locking catch /retractor catch and locking link Locking Link Locking Catch Schlage • L-Series service manual • 101...
  • Page 102 Assembly of lock case parts L functions only: fire door fuse, fire door catch and hub spring short end of hub spring Fire Door Fuse LV functions only: fire door fuse, fire door catch and hub spring 102 • Schlage • L-Series service manual...

  • Page 103: Trim Options

    93 Bent extruded bar lever design Inside lever assembly Outside lever assembly NOTE: The 93 lever design is discontinued. ⁷⁄₁₆" Dia. ¹¹⁄₁₆" 2⁹⁄₃₂" 5" 3¹⁄₈" NOTE: See Schlage Commercial Price Book for available finishes. Schlage • L-Series service manual • 103...

  • Page 104: Decorative Trim

    Avanti rose (AVA) 2 ” diameter Merano rose (MER) 2 ” diameter >\zn Inside lever assembly Outside lever assembly (Bushing attached at 09-401 factory) Furnished with retainer seating 09-402 tool. Furnished with spanner wrench. 104 • Schlage • L-Series service manual...

  • Page 105: Danmark Stainless Steel Levers

    5” 4.6” 5” 2.56” 2.56” 2.125” 3.3” 2.85” 3” NOTE: See Schlage Commercial Price Book for available finishes. Danmark stainless steel levers 630 Satin stainless steel finish Danmark stainless steel rose ” diameter Schlage • L-Series service manual • 105...

  • Page 106: Wrought Knob Designs

    09-401 2¹⁄₄" 2¹⁄₈" 09-402 2³⁄₄" 2³⁄₄" NOTE: See Schlage Commercial Price Book for available finishes. Rose trim A or B Inside rose 09-403 Blank outside rose 09-508 Rose Design A– 2 ’’ dia. x ’’ Rose Design A– 2 ’’...

  • Page 107: L Escutcheon Trim

    109. 109. NOTES: When ordering trim parts, specify the complete design and finish (e.g. 09-632 01L 605). See Schlage Commercial Price Book for available finishes. Schlage • L-Series service manual • 107...

  • Page 108: N Escutcheon Trim

    ACC, AST, MER, OME, STA 1¹⁄₂” 1” ³⁄₄” ⁹⁄₁₆” ⁷⁄₈” ⁷⁄₈” NOTES: When ordering trim parts, specify the complete design and finish (e.g. 09-402 03N 605). See Schlage Commercial Price Book for available finishes. 108 • Schlage • L-Series service manual...

  • Page 109: Additional Trim Options

    *NOTES: "EZ" thumbturn is not available on doors less than 1 B\, thick. When ordering trim parts, specify the complete design and finish (e.g. 09-633-03L 605). See Schlage Commercial Price Book for available finishes. Schlage • L-Series service manual • 109...
  • Page 110 Specify door hand. is available for 41 and 42 knobs. NOTE: To specify knurling, place the number 8 in front of the lever design code (e.g. 801 for lever design 01 with knurling). 110 • Schlage • L-Series service manual...

  • Page 111: Trim Assembly Parts

    (2) Armor screws, L583-370, #8-32 x ’’ (T-15) (2) Strike screws, L583-371, #12-24 x ’’ (T-20) (2) Esc. mtg. screws, XL11-841, #8-32 x 1 ’’ (T-20) NOTE: Torx ® screw packs are furnished with appropriate T-xx installation tools. Schlage • L-Series service manual • 111...
  • Page 112 Install two spacers between the spring cage (or knob mounting plate) and lock as chassis shown. Spacers (knob applications) are required for both the inside and outside escutcheons. NOTE: L escutcheon designs are not applicable for ANSI A115.1 door preparations. Spacers 112 • Schlage • L-Series service manual...

  • Page 113: Armor Fronts

    Deadbolt 09-167 09-215 09-670 — 09-664 09-717 L460 L464 L462 L480 L/LV9440 L9465 L463 L496 L/LV9444 L9466 L/LV9456 L9473 L/LV9457 L/LV9496 For use with 1C\,’’ thick doors. Use with 1Z\zn’’ faceplate tab, L583-427. Schlage • L-Series service manual • 113...

  • Page 114: Strikes

    Specify lip length and hand of inactive door. *** For 1C\," thick doors use 1Z\zn" wide armor fronts. For 1C\v" thick and up doors, use 1Z\v" wide armor fronts. NOTE: Strike boxes and screws can be ordered as parts. 114 • Schlage • L-Series service manual...

  • Page 115: Cylinders

    26-021 — Concealed 26-023 — L460, L462, L463, L464, L496, L9460, L9462, L9463, L9464 Rose Trim Only 30-001 NOTE: Blocking ring and/or compression rings may be required and must be ordered separately. See page 125 for details. Schlage • L-Series service manual • 115...

  • Page 116: Full Face Cylinders

    Face Plate and Front Cover Plug Exploded view—hotel mortise cylinder Ward rings (4) Emergency key Shown for right hand (RH) doors. Plug Furnished with grooves for stop rings. Notched to bypass stop rings 116 • Schlage • L-Series service manual...
  • Page 117 Specify hand for hotel function cylinders. Not available in Primus. Furnished 0-bitted; emergency keys must be ordered separately. NOTE: Lockout keys are not furnished with cylinders and must be ordered separately. Lockout cylinders will not be master-keyed by Schlage. Schlage • L-Series service manual • 117...

  • Page 118: Concealed Cylinders

    Cam (L583-254 shown) Bottom pins Shell Plug Exploded view—hotel mortise cylinder Emergency key Stop rings (4) Shown for right hand (RH) doors. Notched to bypass stop rings Plug Furnished with grooves for stop rings. 118 • Schlage • L-Series service manual...
  • Page 119 2) 1Z\,’’ (Dim=118) cylinders are furnished unless otherwise specified. Cylinder length depends on function, trim and door thickness. 3) Finishes: 606 and 626. 4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. 5) Extended lengths are available. Schlage • L-Series service manual • 119...

  • Page 120: Full Size Interchangeable Core Cylinders

    Plug Shown for right hand (RH) doors. Assembled with retainer cap pin and cap pin spring. 1Z\x” Front Cylinder only Cylinder with Cylinder with Back compression blocking ring ring and spring Exploded view 120 • Schlage • L-Series service manual...
  • Page 121 Can be ordered with construction core. Specify hand for hotel function cylinders. Not available in Primus®. Emergency key must be ordered separately. *** For this configuration with conventional core, order 30-030 cylinder and 36-082-050 blocking ring. Schlage • L-Series service manual • 121...
  • Page 122 2) Finishes: 606 and 626. 3) Full size cores, conventional and Primus�, can be integrated into any Schlage key system with compatible Everest� or Classic keyways. 4) Primus® cores can be integrated into any Schlage 6-pin key system with compatible Primus keyways.

  • Page 123: Small Format Interchangeable Core Cylinders

    4) Uncombinated cores are furnished less keys, pins, and springs. 5) Control keys must be ordered separately. 6) Specify 80-035 for construction cores. 1C\,” Front Cylinder only Cylinder with Cylinder with Back Exploded view compression blocking ring ring and spring Schlage • L-Series service manual • 123...
  • Page 124 Cylinder with compression Everest restricted combinated core 80-302 K510-730 ring, compression spring Construction core Disposable 80-110 and Z\v’’ blocking ring. Keyed 80-132 Housing less core 80-102 For rose trim also order 36-082-050 blocking ring. 124 • Schlage • L-Series service manual...

  • Page 125: Blocking And Compression Rings

    L9060*, L9071*, L9077*, L9082*, L9082EL/EU*, L9457*, L9458*, L9462 per XL11-886*, L9464*, L9466*, L9482* Escutcheon Rose L9496 Escutcheon Rose L460, L464, L496, L9460, L9464 Rose — L462*, L463*, L9462*, L9463* Two (2) Blocking Rings required. None required. Schlage • L-Series service manual • 125...

  • Page 126: Special Trim Options

    4) Specify cylinder type: "P" for (P) type, "R" for (R, J, F, T) types, and "BD" for (BD, BDC, GD, HD) types, following the part number. 5) Not available with "L" (lock less cylinder) option. 126 • Schlage • L-Series service manual...

  • Page 127: Installation Tools And Kits

    40-157 L-series template (reverse side) 40-158 Mortise pocket 40-160 Mortise lock jig filler (edge) Includes 1 each: Case, jig, long boring shaft, M\," wood cutter bit, 1" wood cutter bit, 1Z\v" wood cutter bit, instruction booklet. Schlage • L-Series service manual • 127...
  • Page 128 Spring, Stop L583-481-603 Screw, Retainer L583-492-604 Plate, Screw L583-490-604 Retainer L583-485-604 Screw, Catch L583-047-MW Spring, Catch L583-038-604 Guide, Aux. Bar L283-006-455 Latch, Aux. L583-026-MW Spring, Hub L583-027-PLA Fuse, Fire Door L583-028-604 Catch, Fire Door 128 • Schlage • L-Series service manual...

  • Page 129: Electrically Locking

    The inside knob/ Cylinders lever is always free for immediate exit. All Schlage cylinders are available with the previously mentioned locks. Specify the locks with the required L9080 EU electrically unlocked (fail secure) cylinder code, e.g.

  • Page 130: Request To Exit (Rx) Feature

    A microswitch inside the lock case is activated when the latch is retracted. White (common) Available only on L9080EL-RX and L9080EU-RX functions. Specify XL12-245 for L9080PEL, or XL12-246 for L9080PEU. Purple (NO) Grey (NC) 130 • Schlage • L-Series service manual...

  • Page 131: Multipoint Lock, Lm9300 Series

    Multipoint lock, LM9300 Series The LM9300 three-point locking chassis is a component in the Schlage Multipoint Lock product. The Multipoint Lock is an integrated assembly which includes the LM9300 three point locking chassis, a specialized Steelcraft door with a concealed vertical rod assembly, and a specialized Steelcraft frame.

  • Page 132: Lubrication Specifications

    L583-020 L583-024 L583-029 L583-030 L583-031 L583-025 L583-045 L583-051 L583-345 L583-346 L583-383 L583-386 L583-387 L283-147 assembly Parts shown above must be barrel lubricated to obtain approximately .3 millimeters of film thickness prior to assembly. 132 • Schlage • L-Series service manual...

  • Page 133: Door Handing

    Pull Rotate Changing cylinder turn hand 180˚ Remove cam. 2. Move ball and spring to appropriate hole. Ball and Spring Hole for le -handed Move Handing Screw Hole for Hole for right-handed non-handed Schlage • L-Series service manual • 133...

  • Page 134: Ordering Procedures

    Ordering procedures Ordering procedures To order Schlage products, descriptive data should be in the same sequence as shown: Line Product Outside Inside Hand Latch Strike Additional Details Item Line Item: Line item number 11. DR THK: Door thickness: Enter door thickness if non- standard.

  • Page 135: Finishes

    Finishes Finishes Schlage Lock products are available in a range of durable, Cleaning and care varies by finish. Clear-coated or oil top quality finishes. Most are available with a clear coating rubbed finishes can be cleaned periodically with a mild that protects against damaging environmental factors, non-abrasive soap and buffed lightly with a clean cloth.
  • Page 136 As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA , Interflex , LCN , Schlage and Von Duprin ® ® ® ®...

This manual is also suitable for:

L463L464L462L496L9010L480 ... Show all

Table of Contents