Table of Contents
Advertisement
About the aspect ratio
Choose how to make the screen suitable for the screen:
1.
Auto: Proportional scaling of an image to fit the
projector's natural resolution in its horizontal
width. This is suitable where the incoming
image is neither in 4:3 nor 16:9 aspect ratios
but where you want to make most use of the
screen without altering the image's aspect
ratio.
2.
4:3: Scales a picture so that it is displayed in the
center of the screen with a 4:3 aspect ratio.
This is most suitable for 4:3 pictures such
as those for computer monitors, standard
definition TV, and 4:3 aspect DVD movies
as these can be displayed without aspect
alteration.
3.
16:9: Scales a picture so that it is displayed in
the center of the screen with a 16:9 aspect
ratio. This is most suitable for images which
are already in a 16:9 aspect such as high
definition TV because as these can be
displayed without aspect alteration.
4.
16:10: Scales an image in ratio so that it is
displayed in the center of the screen with a
16:10 aspect ratio. This is most suitable for
images which are already in a 16:10 aspect
as it displays them with out aspect alteration.
5.
Native:
The image is projected as its original resolution, and resized to fit within
the display area. For input signals with lower resolutions, the projected
image will display smaller than if resized to full screen.
LS625X does not have the 16:10 aspect ratio function.
Image 16:10
Image 16:9
Image 4:3
Image 16:9
Image 16:10
28
Advertisement
Table of Contents
