Using The Powerline Configuration Utility - Belkin F5D4050 User Manual

USING THE POWERLINE CONFIGURATION UTILITY

When you launch the Belkin Powerline Configuration Utility (the Utility), you
will be presented with the screen below.
a
b
The Device Tab
The "Device" tab shows you the Powerline Adapter that your computer is
directly connected to. The Utility will automatically search and connect to
your local Powerline Adapter when you open it.
(a) State
Shows the MAC address of the device that you are directly connected to.
(b) Refresh
Click "Refresh" to scan for the Powerline Adapter that is connected directly to
your computer.
(c) Connect
When there are multiple Powerline Adapters connected directly to your
computer, you can select the device you would like to configure by
highlighting it in the device window and click "Connect".
(d) Link Quality
Shows the signal strength of the related powerline products. This is a
"snapshot" of the signal strength at the time of the scan. Pressing the
"Refresh" (b) button may get a different result. Note: You will receive a poor
link quality when using only one Adapter.
11
c
d