Multivet Virtual Fence DSP13201 User Manual page 7

OPTIONAL:
Proper grounding is necessary to reduce the chance of lightning damage to your
transmitter. It is therefore important to connect a wire between the ground terminal of the
transmitter and a ground rod buried at least 1 m (3') into the ground. Use a heavy gauge wire to
make this connection (#12 or larger). Please consult your local electrician since the grounding
process can vary from one place to another.
Step 7: Boundary flags
Place boundary flags 3 m (10') apart and at the point where the warning beep starts. Beep should
be at least 1 m to 1.5 m (3' to 5') from boundary line. These serve as a temporary visual
boundary for your pet and enable him to learn the area he is to remain within. The flags will later
be removed when your pet has become familiar with the "free zone".
CONGRATULATIONS!
Your new Pet Containment System is now installed!
IV. Receiver SPRAY Collar
Step 1:
Fill the unit with spray. Put the device on a flat surface with filling valve upright. Hold spray
refill upside down. Insert nozzle into refill valve and apply pressure for about 15 seconds. This
should give your device 15 strong sprays.