Table of Contents
Advertisement
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu selection
sequence:
Main Menu → Configuration → Current Configuration
– or –
Main Menu → Configuration → Default Factory Configuration
Select . . .
Network
DSX-1
G.703
Copy Ports
System
Options
System Clock
Cross Connect
Management
and
Communication
NOTE:
The SNMP NMS Security Options screen is not available in IP Conservative mode.
To Access the . . .
Network Interface Options
DSX-1 Interface Options
G.703 Interface Options
Copy Ports Options
System Options
System Clock Options
Cross Connect Mode Options
Assign Time Slots Options
Telnet Session Options
General SNMP Management
Options
SNMP NMS Security Options
SNMP Traps Options
To Configure the . . .
DSL interface ports.
DSX-1 interface ports
(Models 8747 and 8777).
G.703 interface ports
(Model 8779).
DSL network and DTE
interface ports by copying
options from port to port.
General system options of
the unit.
LTU system clock options.
DS1 and DS0
cross-connect ports.
Management support of the
unit through SNMP and
Telnet.
8
Advertisement
Table of Contents
