Panasonic WV-Q204/1S Instructions

Before attempting to mount this product,
please read these instructions carefully and save this manual for future use.
These Rack Mounting Brackets are used for mounting such as the WJ-NT304, etc.
INSTALLATIONS
The installation described below should be made by qualified service personnel or system installers.
Important: Recommended tightening torque is M3: 0.78 N·m (8 kgf·cm).
I Mounting in a Rack
WV-Q204/1S can mount the WJ-NT304 on the rack.
WV-Q204/2S can mount side by side up to two WJ-NT304S on the rack.
Illustrations as shown below are examples to install WJ-NT304 and WJ-NT304S.
1. Remove the four rubber feet from the bottom of the WJ-NT304.
G Mounting one WJ-NT304 with the WV-Q204/1S
2. Fix the mounting brackets (large and small) on both sides of the WJ-NT304 with the eight supplied screws (M3x8) as
shown below.
Rubber feet
Rack mounting
bracket (small)
Model Nos.
Rack mounting
bracket (large)
Rack Mount Bracket
WV-Q204/1S
WV-Q204/2S