Advertisement
G Mounting two WJ-NT304 with the WV-Q204/2S
2. Place the joint metals on the WJ-NT304S as shown below and fix them with the supplied screws (M3x6)
Note: Remove two screws from the rear of the WJ-NT304 beforehand.
Fix the mounting brackets (small) on both sides of the
WJ-NT304S with the eight supplied screws (M3x8) as shown
below.
3. Install the WJ-NT304S with the rack mounting brackets in the
rack by using four screws (not included).
Cautions:
• Do not block the ventilation opening or slots in the cover
to prevent the appliance from overheating.
Always keep the temperature in the rack within +45°C
(113°F).
• Secure the rear of the appliance to the rack by using addi-
tional mounting brackets (procured locally) if the rack is
subject to vibration.
STANDARD ACCESSORIES
WV-Q204/1S: Mount Screw
Binding head (M3 x 8) .................. 8 pcs.
Specifications are subject to change without notice.
For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company,
Unit Company of Panasonic Corporation of North America
Security Systems
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Zone Office
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094
Central: 1707 N. Randal Road, Elgin, IL 60123
Southern: 1225 Northbrook Parkway, Suwanee, GA 30024
Western: 6550 Katella Ave., Cypress, CA 90630
Panasonic Canada Inc.
5770 Ambler Drive,Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales Company
Division of Panasonic Puerto Rico Inc.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Rack mounting
bracket (small)
Joint metal
Rack mounting
bracket (small)
Mounting two WJ-NT304S
Rack mounting screws
WV-Q204/2S: Mount Screw
Binding head (M3 x 8) ................. 8 pcs.
Flat head (M3 x 6) ...................... 12 pcs.
For further informations, refer to Operating Instructions of
System Unit.
When install the unit except CCTV system unit, use supplied
tapping screws.
For European and other fields:
Matsushita Electric Industrial Co., Ltd.
Osaka, Japan
http://panasonic.net
N0407-0
Remove 2 screws from
the rear beforehand.
3TU001717AAA
Printed in Japan
Advertisement
