1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Humidifier
  5. AW 20 S
  6. Operating manual

Trotec AW 20 S Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

AW 20 S
EN
OPERATING MANUAL
AIR WASHER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AW 20 S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Trotec AW 20 S

Summary of Contents for Trotec AW 20 S

  • Page 1 AW 20 S OPERATING MANUAL AIR WASHER...

  • Page 2: Table Of Contents

    • Insert the mains plug into a properly secured mains operating manual must be observed. socket. • Observe the device's power input, cable length and intended use when selecting extensions to the power cable. Completely unroll extension cables. Avoid electrical overload. air washer AW 20 S...
  • Page 3 • have read and understood the operating manual, especially the Safety chapter. Maintenance tasks which require the housing to be opened must only be carried out by specialist electrical companies or by Trotec. air washer AW 20 S...

  • Page 4: Information About The Device

    Furthermore, the device comes with a night mode enabling ultra-silent operation at bedtime. Designation Upper part Control panel Water level indicator Cleaning brush ® SecoSan Stick 10 (optional accessory) Bottom section Disk HEPA filter Pre-filter Air inlet with pre-filter flap Air outlet air washer AW 20 S...

  • Page 5: Transport And Storage

    1. Open the cardboard box and take the device out. 2. Completely remove the packaging. 3. Fully unwind the power cable. Make sure that the power cable is not damaged and that you do not damage it during unwinding. air washer AW 20 S...

  • Page 6: Operation

    HEPA filter indication HEPA filter is activated. Operating mode air Illuminated when air purification indication purification mode is activated. Night mode indication Illuminated when night mode is activated. Fan min indication The fan runs at minimum speed. air washer AW 20 S...

  • Page 7: Available Accessories

    ð If the plasma generator is switched on, the plasma Designation Article number generator indication (29) is illuminated. ® SecoSan Stick 10 6.100.004.110 ð If the plasma generator is switched off, the illuminated plasma generator indication (29) goes out. air washer AW 20 S...

  • Page 8: Errors And Faults

    If the device is not starting, have the electrics checked by 6. Dry the inside of the tank with a lint-free cloth. ® a specialist company or by Trotec. 7. If you want to continue using the SecoSan stick, rinse it thoroughly with clear water.
  • Page 9 9. Refit the pre-filters into the guide rail in the louvre. 10. Close the louvres with a snap. ð The louvres open. 2. Fold out the louvres up to the lock position at 45°. air washer AW 20 S...
  • Page 10 6. Put the upper part back on the device. 7. After switching the device back on, simultaneously press the operating mode button (19) and the fan stage button (20) for approx. 3 s. ð The HEPA filter indication (16) is no longer illuminated. air washer AW 20 S...

  • Page 11: Technical Annex

    AW 20 S...
  • Page 12 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...

Table of Contents