Troubleshooting Guide - Hamilton Beach CPM800 Series Operation Manual

Recipe
Classic White Sandwich Bread
8 cups (1.06 kg) unbleached all-purpose flour
2 tbsp. plus 1 tsp. (18 g) active dried yeast
2.5 oz. (67 g) butter (melted)
2 tbsp. plus 1 tsp. (18 g) salt
1/4 cup (53 g) granulated sugar
22 oz. (651 ml) warm water (110°F/43°C)
1. If using dried yeast, pour the warm water into the bowl and add the yeast and sugar.
Let it stand for 10 minutes until frothy. For other types of yeast, follow the manufacturer's instructions.
2. Add the flour, salt, and melted butter.
3. Knead at speed 1 for 30 seconds.
4. Continue kneading for 3 minutes and 30 seconds at speed 2 or until the dough is smooth.
5. Place in a greased bowl covered with a clean cloth, and leave in a warm location to rise until it has
doubled in size.
6. Punch dough down and divide it in half.
7. Fill 1-lb. (454-g) greased bread pans or shape into rolls. Cover with a clean cloth and leave
in a warm location to rise until it has doubled in size.
8. Bake at 450°F (232°C) for 30–35 minutes for loaves or 10–15 minutes for rolls. When ready,
the bread should sound hollow when tapped on the bottom.
Yield: 4 loaves (16 slices each)

Troubleshooting Guide

Planetary mixer will not turn on.
• Make sure mixer is plugged in.
• Make sure mixer head is locked in down position.
• Make sure power switch is ON (I).
• Make sure interlock bowl guard is in place. Mixer will not start without interlock bowl guard in place.
• Make sure speed is selected first; then press start button or hold for pulse.
• This machine is equipped with motor overload protection. If the motor stops during operation due to
overheating, unplug and allow it to cool down for approximately 15 minutes. Plug machine back in to
resume normal operation.
• Press RESET (power switch).
Beater, dough hook, or wire whisk hits against bottom of bowl.
• Make sure bowl is seated properly and engaged in bowl lock.
• Make sure attachment is properly seated and locked in attachment socket.
• Adjust the shaft length on the attachment. See "Adjusting Attachments" on page 6.
Motor strains or stops.
• Reduce ingredients or work with smaller batches.
Poor mixing results.
• Attachment does not reach bottom of bowl. Adjust shaft length on attachment. See "Adjusting
Attachments" on page 6.
• Reduce ingredients.
• Adjust mixing time.
9