Specifications - Universal Analyzers 270SF Instruction Manual

4.0

Specifications

Sample Flow Rate
Calibration Gas Requirement
Operating Pressure Drop at 10 l/m
Maximum Stack Temperature
Oven Temperature
Enclosure Dimensions:
Fiberglass
SS
Weight
Input Voltage Requirement
Input Power Requirement
With Optional Heated Enclosure
Electrical Classification
Ambient Temperature, Operating
Blowback Tank Volume
Blowback Duration
Enclosure
Sample Line Connection
Heater Type
Available Filter
Chamber Materials
MAN.270SF.REVB.102018
OPERATING SPECIFICATIONS
0 to 20 l/m
Sample flow rate plus 10%
12" water column
700°F (370°C)
340°F (171°C)
H 18" x W 16" x D 10" (H 458mm x W 407mm x D 255mm) f
H 16" x W 14" x D 8" (H 407mm x W 356mm x D 203mm)
25 lbs (12kg) (plus probe)
115/230VAC 50/60 Hz
150 watts
350 watts
**External fuse required of 20 A or less**
General purpose
200°F maximum (93°C)
0.7 scf (19.8 l) when at 100 psig (7.4 barg)
0.5 sec. to empty accumulator
Nema 4x fiberglass (standard)
Stainless steel (optional)
3" Heat shrink boot (standard)
4" Heat shrink boot (optional)
2" Heat shrink boot (optional)
Rod heaters in aluminum block, controlled w/ thermal switch
2 µm ceramic (standard)
316SS (optional)
316SS (standard)
316SS, SilcoNert™ coated Hastelloy C-276
Page 7 of 18