Sony IPELA PCS-TL50 Manual page 3

3
Set "Enable IPELA VC Link" to "On," and enter an
"IPELA VC Link Number" and "Password."
Note
For details on acquiring an IPELA VC Link number
and password, consult your Sony dealer.
IPELA VC Link
1 /3
Enable IPELA VC Link
IPELA VC Link Number
Password
When "Enable IPELA VC Link" is set to "On," the
"NAT Mode" item on Page 2 of the IPELA VC Link
menu automatically switches to "Auto (UPnP)," and
"Line I/F" and "Number Display" switch to "IPELA
VC Link." In addition, the "LAN Bandwidth" item on
Page 3 automatically switches to "512Kbps."
IPELA VC Link
2 /3
NAT Mode
NAT Address
Port Number
Line I/F
Number Display
IPELA VC Link
3/ 3
LAN Bandwidth
Dial
Answer
Multipoint
On
12345678
******
Save Cancel
Auto (UPnP)
. . .
5060
IPELA VC Link
IPELA VC Link
Save Cancel
512Kbps
512Kbps
512Kbps
Cancel
Save
4
Select "Save," then press the ENTER button.
The message "The NAT settings, line interface, and
LAN Bandwidth will be changed. Disabling the Web
Access setting is recommended." appears.
Note
The Web Access setting can be changed on the
Administrator Setup menu.
5
With "OK" selected in the message dialog box, press
the ENTER button.
The first time the settings are configured the system
resets and the launcher menu appears.
IPELA VC Link:12345678
ISDN:012345678912
1 2 3
Bob John OSAKA
VCLink
Press the PUSH ENTER button on the Remote Commander to adjust the camera angle.
Preparing for a Videoconference With the IPELA VC Link Function
Detailed Dial
Phone Book
4 5 6
NEW YORK
Dial
3