Yamaha SHS-500 Reference Manual page 11

How to Use the Terminals
NOTE
• This instrument is not compatible with the Yamaha file transfer software "Musicsoft Downloader" and so cannot
transfer any files.
• You don't need to set the Function "MIDI Select" setting for transmitting/receiving the audio data.
NOTICE
The USB cable connection will not work correctly if you pull out the USB cable without closing the app during
Bluetooth connection. If this happens, turn the power to the instrument on again and then try connect again.
Audio playback
1.
Turn off the power of the instrument, then connect your smart device or a
computer to the instrument with the USB cable.
For the proper order, carefully follow the indicated instruction steps as illustrated on page 10.
2.
Turn on the instrument.
3.
Playback song (audio data) on the smart device or the computer.
The sound of the audio data is produced through the built-in speakers of this instrument.
Audio recording
1.
Turn off the power of the instrument, then connect your smart device or a
computer to the instrument with the USB cable.
For the proper order, carefully follow the indicated instruction steps as illustrated on page 10.
2.
Turn on the instrument.
3.
Recording the performance of this instrument as audio data on recording
software or music production software on the smart device or computer.
For recording operation, refer to the Owner's Manual supplied with the software. You can
record audio data to a Yamaha app "Chord Tracker" as well.
11