Packing List The following items should be included: Fume Extractor .......... 1 unit RJ12 direct cable ........2 units Ref. FAE2-5A Ref. 0019755 Includes FAE2-100 Cleaning stick ..........1 unit Ref. 0004009 Power cable ..........1 unit Manual ............1 unit Ref.
Page 3
w w w.jbctools.com Features Aspiration Aspiration Aspiration tube for up tubes for tube for up to 4 stands workbenchs to 4 stands Air flow valve Side closure for filter change Filter saturation indicator Process screen Power socket Wheels and brake system to move around easily Main switch...
Page 4
For modular stands (59.05 in) (SD versions) Connect the Fume Extractor to the flexible Ref. FAE060 arm or to the accessory for stand aspiration For compact stations (From B versions on) Fume Extractor Ref. FAE2-5A Visit www.jbctools.com for further details.
Page 5
w w w.jbctools.com Connection with Excellence range Connect up to 2 stations directly to the fume extractor. - For a correct operation always update the latest software version. The minimum required version is number 8886160 for DDE, HDE & NAE stations and number 8886162 for DME stations. - Connectable to stations through the RJ12 ports.
Working modes Autonomous Pedal Activate the vacuum system with the pedal without being connected to a JBC station. Continuous mode The fume extractor works in continuous mode with the four valves opened. Remote Robot Manage the fume extractor using a robotic system by means of the RJ12 connector.
w w w.jbctools.com Control Process Main Screen Aspiration program Filter Custom Filter P r e s e t High, medium Remaining and low filter lifetime Work Inlets status Port 1 W 0:05 S 1:00 Port 1 W 0:05 S 1:00 Aspiration ports Port 2 W ON S OFF...
Page 8
Control Process Unit Screen U n i t 1 Continuous mode It opens all aspiration inlets with the selected program 2 Robot (high, medium, low or custom). 3 Beep 4 PIN 5 Change PIN 6 Unit lock B a c k R o b o t Enables station address to Selects the station address...
Page 9
w w w.jbctools.com Control Process Port Screen P o r t Selects between a Preset (High, 1 Program Ctm - 100% Medium, Low) and Custom 2 Delay pt 1 aspiration program. 3 Delay pt 2 4 Pedal pt 1 5 Pedal pt 2 B a c k D e l a y t o s t o p p o r t 1 P e d a l p o r t 1...
Maintenance Filter replacement - The unit notifies through both the display and the LED when filters need maintenance. - To replace the filters, first turn the fume extractor off. Then remove the cover by opening the side closures of the casing. Pre filter Ref.
Page 11
w w w.jbctools.com Maintenance Valves - Check the status of the valves when replacing the pre-filter or the compact filter. - Use the cleaning stick if necessary and clean with alcohol to remove dirt residues. Clean the disc and the gasket on both sides Inlet valve Ref.
Page 12
Safety Follow safety guidelines to prevent electric shock, injury, fire or explosion. - The equipment is only designed to filtrate the fumes generated by soldering. - Do not use the units for the filtration of combustible, explosive or corrosive gasses. Incorrect use may cause fire.