Profoto B10 User Manual page 23

Control sounds
The CONTROL SOUNDS setting can be set to ON or OFF to enable/
disable tactile sounds for control knobs and buttons. Factory default
setting is ON.
Exposure warning
The EXPOSURE WARNING setting can be set to ON or OFF to enable/
disable a warning sound for wrong exposure if a flash is fired before
the Profoto B10 has recycled. Exposure warning is also issued if the
requested flash energy is out-of-range while using TTL. Factory default
setting is OFF.
NOTE
Regardless of EXPOSURE WARNING setting, a yellow EXP symbol will appear on the
main screen to warn if the flash cannot fire at set power.
Display brightness
The DISPLAY BRIGHTNESS setting is used to set display brightness.
There are four selectable settings:
•
AUTO: The display brightness is automatically adjusted based on
the ambient lighting. This is the factory default setting.
•
MAX
•
MEDIUM
•
LOW
Standby
The STANDBY setting sets a timer for a period of inactivity until the
Profoto B10 goes into standby mode to save battery. There are four
selectable settings:
•
5 MIN: The Profoto B10 goes into standby mode after 5 minutes
of inactivity.
•
30 MIN: The Profoto B10 goes into standby mode after 30 minutes
of inactivity. This is the factory default setting.
•
1 HOUR: The Profoto B10 goes into standby mode after 1 hour of
inactivity.
•
NEVER: The Profoto B10 never goes into standby mode.
www.profoto.com
23