Table of Contents
Advertisement
Getting started
Charge the battery
The battery can be charged from any charge level. Only use the Profoto
charger supplied with the Profoto B10 or other chargers recommended
by Profoto.
Charge the battery:
1.
Connect the battery connector plug [27] on the battery charger to
10
the battery charge connector [22] on the battery.
2. Connect the battery charger to mains power.
3. Check that the charger indicator [26] is continuously amber,
indicating that charging is in progress.
4. When the charging is completed, the charger indicator [26] turns
green. When not charging it is recommended to disconnect the
battery charger from mains power and from the battery.
NOTE
• If the battery is deeply discharged, the charging time can be longer than specified
in section Technical data.
• Battery charger indicator blinking amber indicates battery error. Contact a Profoto
dealer for support.
Check the battery status
The battery charge can be checked on the battery itself by pressing the
Battery status button [20].
While the battery status button is pressed, the battery charge status is
indicated by the Battery status LEDs [21]:
5 LED:
4 LED:
3 LED:
2 LED:
1 LED:
www.profoto.com
75-100 %
50-75 %
25-50 %
10-25 %
<10 %:
Hide quick links:
Advertisement
Table of Contents
