Switch Between Button Modes On The Remote Control (Psm6500, Psm6800) - Philips SpeechOne PSM6300 User Manual

Mode Button LEDs
Event mode
Keyboard mode
Browser mode
Windows
speech
recognition
mode
Dragon for Mac
mode
Dragon for
Windows mode
4
To switch to a different mode, press the Record
button on the docking station repeatedly until you
have reached the desired mode. E.g. if you are in
Event mode and want to switch to Keyboard mode,
press the Record button once. If you are in Event
mode and want to switch to Dragon for Windows
mode, press the Record button five times.
5
To confirm your selection of the desired mode and
exit mode selection, briefly press the Phone and
the Do-not-disturb button on the docking station
simultaneously.
Tip
• You can always check your current button mode by
briefly pressing the Phone and the Do-not-disturb
button on the docking station simultaneously. Your
currently selected mode will be displayed immediately
(as illustrated in the previous table).
Switch between button modes on the remote
Function
control (PSM6500, PSM6800)
of Record
button
To switch between the button modes:
Start/end
1
recording Press the End-of-letter/priority (•EoL/••Prio)
button and the Insert/overwrite (INS/OVR) button
Turn on/off simultaneously for three seconds.
SpeechOne X All button LEDs on the remote control flash
microphone
when using
2
Dragon Press the corresponding button for the desired mode.
speech The buttons are assigned to the button modes as
recognition follows:
software
Start/end
recording
Event mode
Turn on/off
Windows
microphone
Keyboard mode
Turn on/
off Dragon
microphone
Browser mode
Turn on/
off Dragon Windows speech
microphone recognition mode
Dragon for Mac
mode
Dragon for
Windows mode
X The SpeechOne exits the mode selection and
• You have 10 seconds to select a mode. After 10
seconds, you will automatically exit mode selection
and need to restart the mode selection steps.
• You can always check your current button mode by
briefly pressing the End-of-letter/priority (•EoL/••Prio)
button and the Insert/overwrite (INS/OVR) button
simultaneously. The LED ogf the button assigned to
the current mode (see previous table) shortly lights
up orange. E.g. if the currently activated mode is the
Event mode, the LED of the F1 button lights up orange.
simultaneously.
Mode Button
F1
F2
F3
F4
•EoL/••Prio
INS/OVR
switches to the selected mode.
Note
Tip
Function of
Record button
Start/end recording
Turn on/off
SpeechOne
microphone when
using Dragon
speech recognition
software
Start/end recording
Turn on/
off Windows
microphone
Turn on/off Dragon
microphone
Turn on/off Dragon
microphone
Use your SpeechOne 21