Visioneer RoadWarrior 3 Series User Manual page 36

® TM
V R W
ISIONEER OAD ARRIOR
The scanner should be calibrated as part of your monthly maintenance of the scanner. If the scanner is used daily
you may need to calibrate the scanner more often. You will need to have the calibration page ready.
Caution: do not attempt to calibrate the scanner with any other type of document (i.e. white paper or
a copy of the calibration page).
The calibration routine will fail and indicate the failed calibration by flashing a red LED on the scanner. A
calibration page was included with your scanner, if you do not have one available, you can order a replacement
from the Parts & Accessories page for your scanner at www.visioneer.com.
To calibrate the scanner:
1. Open the scanner's hardware properties page as described on page 32.
2. Click on the Device Settings tab.
3. Click on the Calibrate button to start the calibration utility.
36
S M S
ERIES OBILE CANNERS
S U ' G
CANNER SER S UIDE