Cleaning The Scanner - Visioneer RoadWarrior 3 Series User Manual

® TM
V R W
ISIONEER OAD ARRIOR
2. Remove the jammed paper and close the cover.
Gently close the scanner lid. Press down on both sides of the lid until you hear a click as the arms lock the
scanner lid in place.
To reduce the number of paper jams, smooth and straighten the paper before scanning, and insert the paper
evenly into the scanner.
C S
LEANING THE CANNER
Clean the inside of the scanner to remove dust and paper debris from the scanner glass, pickup and feed rollers.
Cleaning the inside of the scanner helps to keep your scanner operating at optimum performance. Dust
accumulation on the rollers will prevent documents from feeding straight through the scanner, dust on the
scanner glass will appear as lines in the scanned image.
You should clean the inside of the scanner at least once a week or as needed depending on how often the
scanner is used. If cleaning the scanner does not resolve any image quality issues, please follow the instructions in
the next section for calibrating the scanner.
You will need the cleaning cloth provided with your scanner.
1. Place your thumbs on either side of the paper feed slot, underneath the lid of the scanner. Hold the scanner
sides firmly and pull the scanner lid up to release it from the body of the scanner.
Use both hands to open the scanner, the lid is held down with locking arms on both sides of the paper feed
slot. If you open only one side, you may damage the scanner lid.
34
S M S
ERIES OBILE CANNERS
S U ' G
CANNER SER S UIDE