Advertisement
MULTI BATTERY INSTALLATION
If your vehicle has a multi-battery
configuration, Battery Prog Brain can be
mounted to any battery configuration.
However, any primary live positive battery
post must have its own Battery
Consult a certified technician if you
require assistance.
If the two or more batteries are
connected in Parallel, to one primary red
positive cable, then only one Battery Prog
Brain is required. Follow the installation
instructions as previously stated.
If two or more batteries are connected in
parallel, two primary red positive cables,
then you will require two Battery Prog Brains,
to ensure that the batteries are effectively
isolated from the electrical system once
the disconnection threshold is reached.
Mount both Battery Prog Brains at the primary
positive posts connected to the Starter,
Alternator, ECM or any accessory device
that requires electrical power.
Installation Tip: Remote Location: If you
wish to mount the Battery Prog Brain in a
remote location due to space limitations,
or if desired, use proper battery cable.
(Additional cable not supplied)
Series configuration options shown for
example purposes only.
SAMPLE CONFIGURATION OPTIONS
INSTALLATION COMPLETE:
THE MANUAL RESET CONTROL
KNOB ON THE BATTERY
Prog
Brain.
BRAIN UNIT SHOULD BE TURNED TO
THE "ON" POSITION.
THEN PRESS DOWN ON THE MANUAL
RESET CONTROL
KNOB TO ESTABLISH CONTACT.
PROG
OFF
ON
OFF
Advertisement
