Download Print this page

BPB Battery Prog Brain Installation Instructions Manual page 3

The programmable erd unit.

Advertisement

1. Manual "ON/OFF" Reset Control Knob under
removable protective cap
2. Positive (+) side of Battery Prog Brain (side with
writing) with Butterfly Connector
3. Black Ground Wire, attached to unit
4. White Antenna Wire, attached to unit (type II
& III only)
Type IV Only-This unit has the same remote
capacities as the type III, but uses a push button(5)
instead of a remote control, to change the
position of the Battery Prog Brain (power
connected/disconnected) press the push button.
The button can be mounted/concealed
anywhere in the vehicle and is connected to the
Battery Prog Brain unit via a wire.
Type IV RV looks like the type IV model but is
designed to be connected to the
utility/house/coach batteries in order to avoid
deep discharge which can prematurely end a
batteries life.
Mount the push button in the desired
location by tightening the nut provided.

Advertisement

loading