Identify Device Information; Table 10: Identify Device Information - Silicon Systems SILICONDRIVE III SSD-D0120PI-5000 Datasheet

ATA C
OMMANDS
I D
DENTIFY EVICE
The information in the following table is returned upon issuing an IDENTIFY
DEVICE command to the SiliconDrive III. Fields marked as Reserved or
Obsolete in the ATA-6 specification are omitted in this table.
Word
0
2
23-26
27-46
47
49
50
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
5000D-00DSR PRELIMINARY
SSD-D
I
NFORMATION

Table 10: IDENTIFY DEVICE Information

Value
045Ah
15
7
2
C837h -
XXXXh -
XXXXh -
8001h
15-8
7-0
-
-
0F00h
13
11
10
9
8
4000h
15
14
0
S S
ILICON YSTEMS
All unauthorized use and/or reproduction is prohibited.
P
( )-5000 D
XXX X
Description
General configuration bit-significant
information:
0 = ATA device
0 = Fixed device
Response is incomplete
Specific configuration
Firmware revision (eight ASCII characters)
Model number (40 ASCII characters)
Multiple count:
80h
00h = Reserved
01h-10h = Maximum number of sectors that
shall be transferred per interrupt on READ/
WRITE MULTIPLE commands
11h-FFh = Reserved
Capabilities:
0 = Standby timer values shall be managed by
the device
1 = IORDY is supported
1 = IORDY may be disabled
Shall be set to 1
1 = DMA is supported
Capabilities:
Shall be cleared to 0
Shall be set to 1
Shall be set to one to indicate a device specific
Standby timer value minimum
P
ROPRIETARY
10
AGE
S [P
ATA HEET RELIMINARY
M 16, 2009
ARCH
]