Installing And Using The Optional Legacy View App - Clean Water Systems 5900-BT Neutralizer Operation & Maintenance Manual

5900S Neutralizer Operation & Maintenance Manual

Installing and Using the Optional Legacy View App

For simplified set up and control, please install the Legacy View on a compatible
Bluetooth 4.0+ enabled smart phone or tablet.
Download and install the Legacy View app from the Google Play Store, Apple App Store.
1.
Open the Legacy View app
2.
Choose a valve device at any time from the list of available devices to connect to by clicking
3.
on it (which means your 5900‐BT control valve, or valves if you have more than one system)
If the valve you want to connect to doesn't show up, or there is a problem connecting press
4.
the "Scan for Devices" button or the Legacy View logo at any time to refresh the list and start
the process over.
If the valve device is a BTLE valve and it has a password other than the default password, the
5.
first time you connect to it the app will ask you to enter the password.
After entering it the first time you should not need to enter it again unless it changes.
6.
The control valve firmware can be updated by the App. When the app is updated
7.
from the Google Play Store or the Apple App Store, it may contain an updated
firmware program for the valve devices.
These updates could contain new features or operational improvements. It is up to
8.
the user to allow these updates to be sent to the valve device. Uploading a new
program takes approximately 1 minute.
Page 16
www.cleanwaterstore.com
Rev 110117