Ezlinq: First Time Setup Overview; Activate (Nettalk Id Required); Setup (Handset Phone And Internet Required); Configure (Ios Or Android Device Required) - NetTalk ezLINQ User Manual

ezLINQ: First Time Setup Overview

1. Activate​ ​
( netTALK ID required)
Activate your phone service.
Guide (with screenshots)
https://nettalkconnect.com/resources/nt/pdf/nexgen-activation-guide.pdf
1. Activate your new VoIP phone service​ at nettalkconnect.com
a. Create an alias
b. Select a phone number
c. Register your e911 address
d. Setup AutoPay
​
2. Setup​
( handset phone and internet required)
Setup your ezLINQ in your home or office.
1. Power:​ Plug the ezLINQ into an electrical outlet.
2. Phone: ​ A ttach a phone to the ezLINQ. ​
3. Internet:​ Attach the ezLINQ to a modem or router. ​
ethernet ​ c able. ​
to use the ethernet cable.)
​
3. Configure​
( iOS or Android device required)
Configure your ezLINQ with phone service and internet access.
Guide (with screenshots)
https://nettalkconnect.com/resources/nt/pdf/ezlinq-quick-start-guide.pdf
1. Download​ and Install the ​ T ALK App ​
2. Login and go to "More" > "Manage ezLINQ"
3. Select "Setup Wizard"
a. Assign a VoIP phone service
b. Connect to a WiFi network
c. Change default router mode (optional, coming soon)
4. Wait for the LED light on the ezLINQ to go from "blinking blue" to "solid light-blue"
5. After the LED light turns "solid light-blue", pick up your phone handset. You
should hear a dial tone and you should be able to make and receive calls
​
( If you plan to connect to a WiFi network, then there is no need
I f needed, use the included ​ p hone ​ c able.
I f needed, use the included
( available at nettalk.com/app)
4