How To Setup Wisp Client Router Mode; (Create A Wifi Hotspot) - NetTalk ezLINQ User Manual

How to setup WISP Client Router Mode

(Create a WiFi Hotspot)

WISP Client Router Mode
Connect to an outdoor WISP (Wireless Internet
Service Provider) Access Point to allow multiple
devices/users to share the same wireless internet
connection.
● For WISP subscribers, log in to the WISP
account to establish a Wi-Fi hotspot
through an outdoor WISP AP.
Setup Steps:
1. Write down the SSID and Passphrase
located on the label under your ezLINQ.
2. Plug the ezLINQ to an electrical outlet.
3. Use the ​ T ALK App​ to connect the
ezLINQ to a WiFi signal provided by your
Internet Service Provider (ISP).
4. Wait for the LED light to turn solid blue.
5. The ezLINQ broadcasts its own WiFi
signal with an ​ S SID​ label.
6. Connect your WiFi-enabled devices to this
SSID. Enter the ​ p assphrase​ for the
SSID.
7. Your WiFi-enabled devices should now
have internet access on the WiFi signal
provided by your ISP.
15