How To Setup Different Router Modes; How To Setup Wireless Router Mode (Default Mode); (Create A Wifi Network) - NetTalk ezLINQ User Manual

How to setup different router modes

How to setup Wireless Router Mode (default mode)

(Create a WiFi network)

Wireless Router Mode
Connects to a DSL or cable modem and functions
as an N300 Wireless router.
● Use anywhere a router is needed to
connect to a modem and create a wireless
internet network.
Setup Steps:
1. Write down the SSID and Passphrase
located on the label under your ezLINQ.
2. Plug the ezLINQ to an electrical outlet.
3. Use the blue ​ e thernet cable​ to connect
your internet ​ m odem ​ t o the blue ezLINQ
port labeled ​ " INTERNET"​ .
4. Wait for the LED light to turn solid blue.
5. The ezLINQ broadcasts its own WiFi signal
with an ​ S SID​ label.
6. Connect your WiFi-enabled devices to this
SSID. Enter the ​ p assphrase ​ f or the SSID.
7. Your WiFi-enabled devices should now
have internet access.
11