Accessing Usee For The First Time; Connect Your Web-Browsing Device To The Usee Network; Change The Default Password Of The Admin Account - HELVAR uSee Installation And Setup Manual

4.

Accessing uSee for the first time

4.1. Connect your web-browsing device to the uSee network

1. In the Windows notification area, click the Network icon.
2. From the list of available wireless networks, select HELVARuSee[Serial_number].
The serial number is printed on the label at the rear chassis of the uSee unit.

4.2. Change the default password of the Admin account

1. In the browser's address bar, type 192.168.1.1, and then press Enter to display uSee's main screen.
2. Click Configuration to display the Restricted Access screen.
3. Note that the username for the Administrator account is Admin. You cannot change this username.
4. In the Current Password text box, type password.
5. In the New Password text box, type the new password that you want to use.
The new password must contain at least eight characters, at least one number, and at least one letter. It must not
contain any special characters.
If you forget your password, contact your Helvar representative.
6. In the Confirm New Password text box, retype the password that you want to use.
7. Click the Update button, and uSee will create the Administrator account.
Once you have completed this task, the options located under the Login button will not appear again.
Helvar 8801 uSee Web Browser User Interface: Installation and Set-Up Guide
10
This is the default password.