Getting Connected; Network Operators - Alcatel TRU 5065N Quick Start Manual

7
Getting connected �������
To connect to the Internet with this phone, you can use GPRS/
EDGE/3G/4G networks or Wi-Fi, whichever is most convenient.
7�1 Connecting to the Internet
7�1�1 GPRS/EDGE/3G/4G
The first time you turn on your phone with your SIM card inserted,
it will automatically configure your network service: GPRS, EDGE,
3G or 4G.
To check the network connection you are using, touch Settings/
More���/Mobile networks, and touch Access Point Names or

Network operators.

7�1�2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is
within range of a wireless network. Wi-Fi can be used on your phone
even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
Touch Settings/Wi-Fi.
•
• Touch the switch
• The detailed information of detected Wi-Fi networks is displayed in
the Wi-Fi networks section.
• Touch a Wi-Fi network to connect. If the network you selected is
secured, you are required to enter a password or other credentials
(you can contact the network operator for details). When finished,
touch CONNECT.
7�1�3 Wi-Fi Calling
Wi-Fi Calling allows you to make and receive phone calls and messages
over a Wi-Fi connection.
Important! You must have an E911 address registered with your
account in order to use Wi-Fi Calling. Log into your account at
metropcs.com and go to your profile to register your address. You can
also register an E911 address via the myMetro
22
to turn Wi-Fi ON/OFF.
app.
®